User manual JENSEN JIMS-205I DATASHEET

[. . . ] Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: · Start your volume control at a low setting. [. . . ] 3. Press the POWER Button to turn on the unit. Press the FUNCTION Button to switch to the radio mode. Press the "FOLDER/REP -UP" button on the main unit or " FOLDER / PRE on remote control to select the preset channels. or " button Note: 1. There is a 10 second delay when programming, after 10 seconds, the unit will automatically switch back to normal tuner mode. You can overwrite a present station by overwriting and storing the new frequency in its place. CD OPERATIONS NOTE: This player will not only play commercial CDs, but also self-complied CD-D/RW discs. Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs. Notes on CD-R/RW Discs · · · Because of non-standardized format definition/production of CD-R/RW/MP3/WMA-CD, playback quality & performance are not guaranteed. Manufacturer is not responsible for the playability of CD-R/RW/MP3/WMA-CD due to recording conditions such as PC performance, writing software, media ability, etc. Do not attach a label or seal to either side of the CD-R/RW/MP3/WMA disc. The following procedures can be accomplished by using the remote or controls on the unit. 12 PLAYING A COMPACT DISC 1. Press the POWER Button to turn on the unit. The search time for an MP3-CD is also longer than a normal CD due to difference in formatting. PROGRAMMING CD TRACKS (USING REMOTE CONTROL) Up to 20 tracks can be programmed for playback in the order you desire. . 1. In CD stop mode, press the "MEMORY/CLK-ADJ" button once, the program icon "MEM", track number 01 (001 for MP3/WMA CD) and program number P01 will appear on LCD display. "MEM" and track number will flash to prompt for input. CD MP3/WMA-CD 2. Select a desired track by pressing skip or buttons. For MP3/WMA disc, press the FOLDER icon will appear on display. CD skip to the first track of next folder / PRE UP button, directly to speed up the selection. Press or buttons to select desired track in the folder. Press the "MEMORY/CLK-ADJ" button to store the track into memory. Repeat steps 2 and 3 to enter additional tracks into the memory if necessary. Up to 20 tracks can be memorized. 14 5. [. . . ] PROBLEM The unit will not play Unit is ON but there is low or no volume Noise or sound distorted on AM or FM broadcast POSSIBLE CAUSE The unit is disconnected from the AC outlet The AC outlet has no power The volume Control has been turned all the way down Station not tuned properly for AM or FM. FM: The FM wire antenna is not fully extended. AM: The loop antenna is not positioned correctly You have tuned to a mono station or the station is too weak FM MONO MODE is set System not in CD function mode Unit not in CD function mode. If the CD is self-compiled, the media used may not be compatible with the player. [. . . ]