User manual JENSEN JMC-670

[. . . ] JMC-670 WALL MOUNTABLE FRONT LOADING DUAL MP3 CD SYSTEM WITH DIGITAL TUNER AND REMOTE CONTROL INSTRUCTION MANUAL Please read and follow this instruction manual carefully before using the unit and retain it for future reference HX-1056M3 IB JENS 001 REV0. P65 1 7/20/2005, 2:50 PM WARNING TOPREVENTFIREORSHOCKHAZARD, DONOTUSETHISPLUGWITHANEXTENSIONCORD, RECEPTACLE OROTHEROUTLETUNLESSTHEBLADESCANBEFULLYINSERTEDTOPREVENTBLADEEXPOSURE. TO PREVENTFIRE OR SHOCK HAZARD, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE. FCC INFORMATION IMPORTANT SAFETYINSTRUCTIONS 1. Keep these instructions Heed all warnings. Follow all instructions Do not use this apparatus near water Cleaning-Unplug this product from the wall outlet before cleaning, Do not use liquid cleaners or aerosol cleaners. Install in accordance with the manufacturer's instructions. [. . . ] a) Repeat current track - Press Repeat button once, the REPEAT indicator appears and current track repeated continuously. : b) Repeat Folder (MP3-CD only) - Press Repeat button until REPEAT FOLDER indicator shown on display, the selected folder will repeated continuously. 4. Press the / Button (11/H7) to adjust the minute. 5. Press MEMORY Button (7/H6) again to complete setting. : c) Repeat current disc - Press Repeat button unitil REPEATALL indicator shown on display, the current CD will repeat continuously. : COMPACT DISC OPERATIONS NOTE: This player plays not only commercial CDs but also self-complied CD-R/RW/MP3-CD discs. d) Random play - Press Repeat button until RANDOM indicator appears on display and the current disc will play randomly. BASIC DISC(s) PLAY 1. Press the Button (10/H1) to turn on the unit. 2. Press the OPEN/CLOSE Button (2/H10) to open both the CD door. 3. Place the CD(s), with label side facing outward, inside the CD compart ment. Press OPEN/CLOSE Button (2/H10) again to close the CD doors. IMPORTANT: The CD doors are motorized doors. DO NOT PUSH WITH HAND OR USE ANY OT HER MEANS TO OPEN OR CLOSE IT. 4. Press the Function Button (3/H3) to operate the unit in CD mode. Press CD1/CD2 (4/H4) button to select the CD location. 6. The unit will scan the CD in selected CD compartments, the total number of tracks and total play time of the CD in the chosen CD location appear in the display (18). (Only Folder number and track number will shown for MP3-CD) E-9 H1 : DISC ERROR Note: If the disc is dirty, damaged or unreadable, the `NO DISC' will appear in the display. If this occurs, clean the disc, insert the disc correctly, or try another disc. H3 H5 PROGRAMMING CD TRACKS With this function you can program up to 20 titles of selected disc in the order you desire. This function can only be done in stop mode. Press the MEMORY Button to start programming tracks, "MEMORY" indicator, ` and blinks. ` appear in the display H4 H10 E-10 HX-1056M3 IB JENS 001 REV0. P65 6 7/20/2005, 2:53 PM JMC-670 INSTRUCTION MANUAL JMC-670 INSTRUCTION MANUAL 2. Select the desired track by pressing the / Button (11/H7) to select the track you want to program. 3. Press the MEMORY Button (7/H6) again to enter the selected track in program memory #1. number 4. Repeat steps 2 & 3 to program addiitonal tracks, 20 tracks can be memorized. Button to start playing the tracks in your programmed order. 5. Press PLAY/PAUSE 6. To clear the programmed tracks, press STOP Button until the MEMORY indicator disappear. Note: Random functions are disabled in program play. PROGRAMMING MP3 TRACKS With this function you can program up to 10 titles in the order you desire. This function can only be done in stop mode. ' blink, and ` ' / MEMORY 1. Press the MEMORY Button (7/H6), " FOLDER" indicator and ` indicator appears in the display. Notes on CD-R/RW Discs Because of non-standardized format definition/production of CD-R/RW/MP3-CD, playback quality and performance are not guaranteed. [. . . ] To use this Front Loading Dual CD System to amplify your input audio signal: 1. Press the Function Button (3/H3) to operate the unit in AUX mode. "AUX" Indicator (#D5) appears in the display. Turn on and start playing the device that is plugged into the AUX Jack. [. . . ]