User manual JENSEN JSR-1000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JENSEN JSR-1000. We hope that this JENSEN JSR-1000 user guide will be useful to you.

Lastmanuals help download the user guide JENSEN JSR-1000.


Mode d'emploi JENSEN JSR-1000
Download

You may also download the following manuals related to this product:

   JENSEN JSR-1000 DATASHEET (157 ko)

Manual abstract: user guide JENSEN JSR-1000

Detailed instructions for use are in the User's Guide.

[. . . ] This unit uses one 15 amp fuse located below wiring connector. Replace any items you removed from the dashboard. When wiring is complete, reconnect the battery negative terminal. Does not operate (display does not light) No power to yellow wire No power to red wire Make sure wire is not pinched. [. . . ] CDC ONLY ERR2 appears on display TOC reading error Check disc - may be upside down or dirty If not press RESET button. Press PWR for more than 3 seconds to store level. DIM/Loudness Pressing LOUD for more than 3 seconds will dim the display. Press LOUD again for more than 3 seconds to restore to normal. After five seconds the display will return to the clock. After five seconds the display will return to the CD display. Press and hold DISP button for three seconds until clock display flashes, then release. Audible Beep Press SEL for three seconds to turn beep on or off. Press AS/PS while a disc is playing and display will shift from track display to show the time remaining on the track. Use a pencil tip (or other non-metallic object) to press the RESET button. Intro (Preview all Tracks) Press INT for more than three seconds to play first ten seconds of each track on current CD. Press again for more than three seconds to stop intro and listen to track. Select first track to be entered into program. Then momentarily press MEM to enter them into the program. Press PGM for more than 3 seconds to play programmed tracks. Press MEM for more than 3 seconds while in programmed play to clear programming. CD play resumes after button is released. Direct Track Access Select track number by pressing numbered keys (1 ­ 0). For example for track 12 press button 1 and then button 2. If selected track is not on disk, NO-T appears in the display. [. . . ] Direct Disc Access Press SHIFT button then select disc number using number keys. if selected disk is not in changer NO-D appears in the display. Note: Depending on CD changer, if selected disc tray is empty, CD changer may either advance to next disc or revert to previous disc. The compact disc changer plays all songs on a disc then advances to the next disc in order. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JENSEN JSR-1000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JENSEN JSR-1000 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag