User manual JENSEN SMPV-2GBLB

[. . . ] DIGITAL MEDIA PLAYER USER MANUAL SMPV-2GBLB PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. [. . . ] Record Mode After turning the unit on, select the Record icon from the main menu using the / buttons. Press the MODE button to enter record standby mode. Before starting, we strongly recommend you fully charge up the battery for stable recording results. This unit allows 99 recording files to be stored in each directory. You just press the REC button directly to start the recording process. When not recording, tap the MODE button to enter the record setting mode. The following options are present. Local folder: Press the / buttons to choose and then press the MODE button again to enter. Select / buttons and press the MODE button again to the desired local folder using the confirm. Press the PLAY button to confirm the selected folder and the unit will return to Record feature and starts recording automatically. Note: The recorded file will always begin with filename "REC001" and go up as you record more files, REC002, REC003, etc. REC type: After choosing the Record type submenu, press the / buttons to set the desired recording format. There are 4 different formats to choose from (see table below). Press the MODE button to confirm. Replay: Choose Replay by pressing the MODE button. Now "A" starts to blink on the screen. Press the button to select the start point "A", then "B" will start to flash for end point selection. Press the button to set the replay end point B. "A-B" stops flashing and now it automatically starts to replay the passage between markers A and B. If you want to change the marker points for a new replay passage, just press "A" starts to flash and repeat above steps to complete. again, then Exit: exit from the submenu. Note on warning message: "Empty Disk!" - It means the player does not have any record files or all record files have been deleted. Attention: For WAV file play, this player swill only play WAV format files from this player. It will not play WAV files copied from a PC. 5. 2 Voice standby mode When voice playback pauses, tap the MODE button to enter voice folder/file mode. The following options are available (similar to Music Mode). Local folder; Delete file; Delete all and Exit 6. [. . . ] For video files 3. 5 Choose "AMV player" from the folder "MP3 Player Utilities". 3. 6 Click the "Add file" icon to choose the video files (in AMV format) you want to watch. 3. 7 Press the "Play" button to play the video file. 4. Drive Encryption This device has 2 memory drives, one is normal and the other one is encrypted which requires a password to access. [. . . ]