User manual JENSEN SMPV-XGBLE DATASHEET

[. . . ] 6 Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CD Player Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Care and Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal keys (supplied) to disengage it. Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve slides easily into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis. Connect wires prior to actually installing the sleeve. Pigtail wiring should take place after hole size is confirmed. Follow the wiring diagram carefully and make certain all connections of the wiring harness are properly secured and insulated to insure proper operation of this unit. After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be "on"). If unit does not operate, recheck all wiring until the problem is corrected. "Off" is the default setting. Power On/Off Press the rotary encoder POWER button (1) to turn the unit on. The unit will resume at the last mode selected (Tuner, Aux, etc. ). PUSH POWER Auxiliary Input (LINE) To access an auxiliary device: 1. Connect the portable audio player to the AUX IN input cables on the back of the radio. Press the MODE button (2) to select LINE mode. "LINE" will appear on the display. Press MODE again to cancel LINE mode and go to the next mode. Volume Control To increase the volume, turn the rotary encoder (1) to the right. To decrease the volume, turn the rotary encoder to the left. While adjusting the volume, the LCD displays a numerical representation of the level. The maximum volume setting is "63". Mute Press the MUTE button (12) on the control panel to mute the audio output. Press MUTE again to restore the audio output to the previous level. Liquid Crystal Display (LCD) The current frequency and activated functions are shown on the LCD panel. NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. [. . . ] Recall a Station Select a band (if needed). Press a preset button (6) to select the corresponding stored station. LOUD INT PUSH POWER 8 JMD200 CD PLAYER OPERATION Inserting and Ejecting a Disc Insert a disc, label-side up, into the disc slot (7). The unit will automatically draw the disc in and play the first track on the disc, whether the power was turned on or not. button (9) to stop disc play and eject the disc. [. . . ]