User manual JENSEN VOYAGER MSR2010

[. . . ] When Boating Keep the volume level Iow enough to be aware of your surroundings. Protect from Water Do not submerge the product directly in water, as this can cause electrical shorts, fire or other damage. Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vessel. Give the interior a chance to cool down before starting playback. [. . . ] BEEP TONE (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are selected). NOTE: Beep tone off will not affect LOW BATT audible tone. The following items can be adjusted: · The reset button (18) should be activated for the following reasons: · If LOW BATT is set to "ON", a alarm will sound (8 beeps every 30 sec) when the voltage drops to 10. A visual warning (LOBA) will appear flashing (8 flashes every 30 sec) in the lower left corner of the LCD display. Press the EQ button (11) to turn on the equalization function and select between five predefined bass and treble curves: OFF > POP > JAZZ > CLASSIC > BEAT > ROCK. When listening to music at low volumes, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Connect the portable audio player to the AUX IN line in on the back of the unit. press the MODE button (4) to select Aux In mode. Press MODE again to cancel Aux In mode and go to the next mode. NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range. When the information is too long to be displayed on the LCD, press and hold the INFO/ SCROLL button (12) to view the entire title. The information will scroll twice and then return to abbreviated text. In the following modes and conditions, press the AS/PS button < 3 seconds to quickly exit the current operation without waiting for the system default time out: · The unit will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. Press the BAND button (16) to change between three FM bands and two AM (MW) bands. Press and hold the TUNE/TRK >>| or |<< buttons (20, 21) to automatically seek the next or previous strong station. Press and hold the AS/PS (15) button for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band. nOTE: During Auto Store (AS) , the tuner will default to "Local" mode while scanning the band initially. After scanning the entire band once, the unit will switch to "Distant" mode for all subsequent Auto Store tuning. [. . . ] If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. handle the product gently and carefully. [. . . ]