User manual JENSEN VOYAGER VM9022

[. . . ] We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Jensen VM9022 Mobile Multimedia Receiver for maximum enjoyment. Congratulations on your purchase of the Jensen VM9022 Mobile Multimedia Receiver. It's a good idea to read all of the instructions before beginning the installation. [. . . ] The channel will begin playing and the unit will return to the Preset Mode. While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of categories. Use the scroll bar and arrows on the touch screen to view the next/previous six stations in the selected category. Touch the on-screen SCN button to preview each channel in the selected category for 10 seconds. Touch the channel name to play that channel. Touch the on-screen CG button to return to the Preset Mode screen. NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays "PARKING" with a blue background. Touch the 1/2 button to view a second page of controls Repeat Playback Press the RPT button (19) on the control panel, the RPT button (7) on the remote control, or the button on screen to alter repeat mode according to the following: · To insert a disc, you must first press the OPEN button (1) on the control panel or the OPEN/CLOSE button on the remote control to reveal the disc slot (22). insert a disc , label side up , into the disc slot. The front panel will close automatically and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 6-digit code must be entered and/or the disc must be authorized (see "General Sub-menu Features" on page 17). You cannot insert a disc if there is already a disc in the unit or if the power is off. NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed. NOTE: For VCD play, the repeat function is not available if PBC is on. Keep pressing and releasing the button to increase the rate from "2X" to "4X", "6X", and "8X". Press the joystick Enter button (18) on the remote control or touch the play button (>) to resume normal playback. Fast Reverse Playback Press the \/ joystick button or touch the << button on the screen to play the current title in fast reverse. Keep pressing and releasing the button to increase the rate from "2X" to "4X", "6X", and "8X". Press the joystick Enter button (18) on the remote control or touch the play button (>) to resume normal playback. Slow Forward/Slow Reverse Playback Press the ||>/BAND button on the remote control to slow forward/slow reverse. [. . . ] (Reference: 1 watt , 4-Ohms) Frequency Response: 20Hz to 20 kHz , -3dB Reference Supply Voltage: 14. 4VDC *Specifications subject to change without notice. The new stations replace stations already stored in that band. Si esta función no está disponible, la unidad central mostrará "Phone book not provided by this phone" (Agenda no provista por este teléfono) cuando se intente descargar una agenda. [. . . ]