User manual JENSEN VOYAGER VR50

[. . . ] Increase this setting to see crisp edges in the picture; decrease it for soft edges . Cycles through color modes: Normal, Cool, Warm. 21 or EXIT button to exit 12 6 Picture Sound Timer Setup Lock Channel Sound· Mode Bass Treble Balance Mute· Select AVC SPDIF· Type Audio· Language Standard 50 50 50 ALL Off PCM English Select Move MENU Exit Sound Mode Bass Treble Balance Cycles through sound modes: Standard, Music, Movie, Sports and Personal. Controls the relative intensity of lower pitched sounds. Controls the relative intensity of higher pitched sounds To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track. [. . . ] On or off (Automatic Volume Control) keep volume level steady. Allows you to select between PCM and RAW(Digital Connection to Home Theater system). Mute Select AVC SPDIF Type Audio Language Allows you to select audio languages: English, French and Spanish. 22 Application Customizing the TIMER Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the TIMER. Use the UP and DOWN buttons to highlight an individual TIMER option, use the LEFT and RIGHT buttons to change the setting, and press the MENU or EXIT button to exit. 12 6 Picture Sound Timer Setup Lock Channel Sleep Timer Time Zone Daylight Saving Time Clock Off Pacific Off 2007 10 31 04 04PM Select Move MENU Exit The TIMER menu includes the following options : Sleep Timer Allows you to set up the sleep timer : 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min and off. Allows you to select correct time zone: Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Allows you to turn on or off the daylight saving time. Time Zone Daylight Saving Time 23 Application Customizing the SETUP Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the LEFT or RIGHT button to select the SETUP. Use the UP and DOWN buttons to highlight an individual SETUP option, use the LEFT and RIGHT buttons to change the setting, and press the MENU or EXIT button to exit. 12 6 Picture Sound Timer Setup Lock Channel Menu· Language Transparency Zoom· Mode Noise· Reduction Advance Close· Capation Audio· Only Restore· Default English Off Normal Off Select Move MENU Exit The SETUP menu includes the following options: Menu Language Transparency Zoom Mode Noise Reduction Advance Allows you to select menu languages: English, Français and Español. Displays the number of current channel. Channel Label Displays the lable of current channel. DTV Signal Displays the quality of current DTV signal. 30 Maintenance and Service Trouble shooting In case a problem occurs with your LCD TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center. Problem The screen does not appear. Action Is the power plug connected?Press the power button of the remote control. This problem occurs for a brief time in the process of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on. But if the screen does not come after 1 minute contact your dealer or an authorized service center. Perform brightness adjustment or Contrast adjustment. Stop using wireless telephones, hair dryers and electric drills. Check if the Pause button is pressed on external equipment. Increase the sound level by pressing volume adjustment button. Check if sound terminal of external input is connected properly. Check if audio cables are connected properly. [. . . ] If the sound still does not work and the other channels are the same after you have done as the above, contact your dealer or an authorized service center. The screen appears too slowly after the power is turned on. Screen is too bright or too dark. Stripes appear on the screen and it shakes. The screen does not move. Screen appears, Voice is not heard Remote control does not work 1. Check that the batteries of the remote controller were loaded properly. [. . . ]