User manual JETAUDIO IAUDIO M3

[. . . ] User's Guide 2 Copyright and Trademarks Copyright and Trademarks · iAUDIO is a registered trademark of Cowon Systems, Inc. · Microsoft, Windows, Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. · MMX and Pentium are trademarks or registered trademarks of Intel Corporation. · IBM and PC/AT are registered trademarks of International Business Machines Corporation. [. . . ] · To finish recording, press the REC button again. "Wait" message appears while the file is saved, and iAUDIO returns to the Radio window when saving finishes. - For information on record quality settings, see the relevant page in this Guide. - The recorded file size cannot exceed 512MB. If the recorded file reaches this size, iAUDIO automatically saves it and then continues saving in a new recorded file. (Recording time for one file: Around 10 hours when the quality setting is 128Kbps) - When free space in HDD is less than 128MB, recording does not start. If free space becomes less than 128MB during recording, iAUDIO automatically stops. Press REC for a few moments. FM recording starts. Press REC button to finish recording. iAUDIO M3 24 Basic Operations Voice Recorder Voice Recorder (Recording Voice with Built-in Microphone) Select Voice Recorder Mode. Voice Recorder is in Stand By status. Press REC button. Voice Recording Starts. Press REC button to finish recording. 1. Preparing Voice Recording · Turn on iAUDIO, press the MODE button and select Voice Recorder. · iAUDIO enters Voice Recording Mode and stays in STAND BY status. 2. Voice Recording Start/Pause/Stop · In STAND BY status, press the REC button to start recording. · Press the PLAY button to pause recording, and press it again to resume recording. · Press the REC button again to finish recording. A "Wait" message appears while the file is being saved, and iAUDIO returns to STAND BY status when the saving finishes. · The recorded file is saved as VOC***. MP3 in the VOICE folder according to the preset recording quality (***: a 3-digit serial number). · You cannot turn off iAUDIO, nor change Menu or Mode while recording. 3. Playing Recorded file · To play the last recorded file, press the PLAY button in STAND BY status. · You can also press the MENU button briefly in STAND BY status to enter Navigator Mode, and then select a file to play. · Operating iAUDIO while a file is played is identical to that of Digital Audio Mode. · When a file finishes playing, iAUDIO automatically returns to STAND BY status. · Press the REC button any time to stop playing. iAUDIO returns to STAND BY status again. 4. Recording Quality and Capacity · For information on recording volumes and quality settings, see the relevant page in this Guide. [. . . ] Changing MP3 Bitrate You can change the bitrate of MP3 files by selecting `MP3 Bitrate Conversion' from the menu. 5. Downloading Logo File You can download a logo file to change the logo screen that appears when iAUDIO powers on. Select `Download Logo File' from the menu. When the `Open' window appears, locate the desired logo file and click `Open'. [. . . ]