User manual JETWAY 603TCR1C

[. . . ] 603TCF/603TCFL Socket 370 G03-603TCR1C 2002 8 : * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 603TCF/603TCFL 1-1 1-2 1-3 1-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Capability Video BIOS Shadow :Move Enter:Select F5:Previous Values [Disabled] Enabled Enabled Disabled Disabled Enabled Floppy HDD-0 CDROM Enabled Disabled Enabled On Normal Disabled 6 250 Setup Non-OS2 Disabled Enabled +/-/PU/PD:Value F10:Save F6:Optimized Defaults Item Help Menu Level > Allows you to choose the VIRUS warning feature for IDE Hard disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep enabled copies Video BIOS to shadow RAM improves performance ESC:Exit F1:General Help F7:Standard Defaults Virus Warning Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table. Enabled Activates automatically when the system boots up causing a warning message to appear when anything attempts to access the boot sector of hard disk partition table. 3-6 Advanced Chipset Features The Advanced Chipset Features Setup option is used to change the values of the chipset registers. These registers control most of the system options in the computer. CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software Advanced Chipset Features 24 Advanced DRAM Control Advanced AGP Control Memory Hole System BIOS Cacheable Video RAM Cacheable Memory Parity/ECC Check [Press Enter] Press Enter Disabled Disabled Disabled Disabled Item Help Menu Level > :Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Optimized Defaults ESC:Exit F1:General Help F7:Standard Defaults Note: Change these settings only if you are familiar with the chipset. Advanced DRAM Control Please refer to section 3-6-1 3-6-1 Advanced DRAM Control The "Advanced DRAM Control" includes settings for the chipset dependents features. These features are related to system performance. Make sure you fully understand the items contained in this menu before you try to change anything. You may change the parameter settings to improve system performance. However, it may cause your system to be unstable if the setting is not correct for your system configuration. CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software Advanced DRAM Control Auto Configuration Precharge Command [Optimized] 3T Item Help 25 Active to CMD Command Write Recovery Time SDRAM Cycle Length Bank Interleave DRAM Drive Strength Delay DRAM Read Latch Memory Data Drive Memory CMD Drive DDSKEW/REFCLK Delay In-Order Queue P2C/C2P Concurrency Fast R-W Turn Around I/O Recovery Time CPU to PCI Write Buffer PCI Dynamic Bursting PCI Master 0 WS Write PCI Delay Transaction PCI#2 Access #1 Retry :Move Enter:Select F5:Previous Values 6T 2T By SPD By SPD Auto 1. 0 ns Normal Strong No Delay 1-Level Disabled Disabled Disabled Enabled Disabled Disabled Disabled [Disabled] +/-/PU/PD:Value F10:Save F6:Optimized Defaults Menu Level >> ESC:Exit F1:General Help F7:Standard Defaults Precharge Command If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain date. Fast gives faster performance; and Slow gives more stable performance. This field applies only when synchronous DRAM is installed in the system. Active Command This field let's you insert a timing delay between the CAS and RAS strobe signals, used when DRAM is written to, read from, or refreshed. Fast gives faster performance; and Slow gives more stable performance. This field applies only when synchronous DRAM is installed in the system. Active to CMD Command Select the number of SCLKs for an access cycle. SDRAM Cycle Length When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. PCI Delay Transaction The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select Enabled to support compliance with PCI specification version 2. 1. The settings are: Enabled and Disabled. 3-7 Integrated Peripherals CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software Integrated Peripherals > OnChip IDE Function > OnChip DEVICE Function [Press Enter] Press Enter Item Help 26 > OnChip SUPERIO Function Init Display First Press Enter PCI Slot Menu Level > :Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Optimized Defaults ESC:Exit F1:General Help F7:Standard Defaults OnChip IDE Function Please refer to section 3-7-1 OnChip DEVICE Function Please refer to section 3-7-2 OnChip SUPERIO Function Please refer to section 3-7-3 Init Display First This item allows you to decide to activate whether PCI Slot or AGP VGA first. The settings are: PCI Slot, AGP Slot. 3-7-1 OnChip IDE Function CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software OnChip IDE Function OnChip IDE Channel0 OnChip IDE Channel1 [Enabled] Enabled Item Help 27 IDE 32bit Transfer Mode Primary Master PIO Primary Slave PIO Secondary Master PIO Secondary Slave PIO Primary Master UDMA Primary Slave UDMA Secondary Master UDMA Secondary Slave UDMA IDE HDD Block Mode IDE Prefetch Mode Disabled Auto Auto Auto Auto Auto Auto Auto Auto Enabled Disabled Menu Level >> :Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Optimized Defaults ESC:Exit F1:General Help F7:Standard Defaults 3-7-2 OnChip DEVICE Function CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software OnChip DEVICE Function OnChip AUDIO Function RealTak LAN Function OnChip USB USB Keyboard Support [Press Enter] Enabled Enabled Disabled (For 603TCFL) Menu Level >> :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Optimized Defaults F7:Standard Defaults 3-7-3 OnChip SUPERIO Function CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software OnChip SUPERIO Function 28 Onboard FDD Function Onboard Serial Port 1 Onboard Serial Port 2 UART 2 Mode IR Duplex Mode TX, RX Inverting enable Onboard Parallel Port Onboard Parallel Mode ECP Mode Use DMA Parallel Port EPP Type :Move Enter:Select [Enable] Auto Auto Normal Half Ho, Yes 378/IRQ7 SPP 3 EPP1. 9 +/-/PU/PD:Value F10:Save Item Help Menu Level >> ESC:Exit F1:General Help F5:Previous Values F6:Optimized Defaults F7:Standard Defaults 3-8 Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use. CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software Power Management Setup ACPI Function > Power Management PM Control by APM Video off Option Video Off Method MODEM Use IRQ Soft-Off by PWRBTN > Wake Up Events [Enabled] Press Enter Yes Suspend -> Off V/H SYNC+Blank 3 Instant-Off Press Enter Item Help Menu Level > :Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Optimized Defaults ESC:Exit F1:General Help F7:Standard Defaults Wake-Up Events Please refer to section 3-8-2 3-8-1 Power Management CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software Power Management 29 Power Management HDD Power Down Doze Mode Suspend Mode [User Define] Disabled Disabled Disabled Item Help Menu Level >> :Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Optimized Defaults ESC:Exit F1:General Help F7:Standard Defaults 3-8-2 Wake Up Events CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software Wake Up Events VGA LPT & COM HDD & FDD PCI Master Modem Ring Resume RTC Alarm Resume x Date (of Month) x Resume Time (hh:mm:ss) > IRQs Activity Monitoring [OFF] LPT/COM ON OFF Disabled Disabled 0 0:7:0 Press Enter Item Help Menu Level >> :Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Optimized Defaults ESC:Exit F1:General Help F7:Standard Defaults IRQs Activity Monitoring Please refer to section 3-8-2. 1 3-8-2. 1 IRQs Activity Monitoring CMOS Setup Utility ­ Copyright(C) 1984-2002 Award Software IRQs Activity Monitoring 30 Primary INTR IRQ3 (COM 2) IRQ4 (COM 1) IRQ5 (LPT 2) IRQ6 (Floppy Disk) IRQ7 (LPT 1) IRQ8 (RTC Alarm) IRQ9 (IRQ2 Redir) IRQ10 (Reserved) IRQ11 (Reserved) IRQ12 (PS/2 Mouse) IRQ13 (Coprocessor) IRQ14 (Hard Disk) IRQ15 (Reserved) [ON] Enabled Enabled Enabled Enabled Enabled Disabled Disabled Disabled Disabled Enabled Enabled Enabled Disabled Item Help Menu Level >>> Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F1:General Help F6:Optimized Defaults F7:Standard Defaults 3-9 PnP/PCI Configuration Setup This section describes configuring the PCI bus system. [. . . ] This would prevent unauthorized use of your computer. You determine when the password is required within the BIOS Features Setup Menu and its Security option. If the Security option is set to "System", the password will be required both at boot and at entry to Setup. If set to "Setup", prompting only occurs when trying to enter Setup. 34 MAGIC INSTALL MAGIC INSTALL WINDOWS 95/98/98SE/ME/NT4. 0/2000/XP MAGIC INSTALL MAGIC INSTALL "" "" "" ":\SETUP. EXE" ( ) MAGIC INSTALL 11 1. [. . . ]