User manual JETWAY 618AFP2A

[. . . ] 618AS Pro/618AF Pro 618AS Pro-R/618AF Pro-R USER'S MANUAL M/B For Socket 370 Pentium III Processor NO. G03-618AFP2A Release date: August 2001 ** Year 2000 compliant ** Trademark: * Pentium is registered trademark and MMX is a trademark of Intel Corporation, the other names and brands are the property of their respective owners * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER'S NOTICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii MANUAL REVISION INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 THERMAL SOLUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Load Standard Defaults Use this menu to load the BIOS default values for the minimal/stable performance system operation. Set Supervisor/User Password Use this menu to set User and Supervisor Passwords. Save & Exit Setup Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. 28 3-4 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. CMOS Setup Utility ­ Copyright(C) 1984-2001 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE IDE IDE IDE Primary Master Primary Slave Secondary Master Secondary Slave 1. 4M, 3. 25 in. None EGA/VGA All Errors 640K 64512K 65536K +/-/PU/PD:Value F10:Save F6:Optimized Defaults ESC:Exit F1:General Help Thu, Jul, 31 2001 16 : 18 : 49 Item Help Menu Level > Change the day, moth, Year and century Drive A Drive B Video Halt On Base Memory Extended Memory Total Memory ¡ü ý ú û Move Enter:Select F5:Previous Values F7:Standard Defaults Date The date format is <day><month><date><year>. Day Day of the week, from Sun to Sat, determined by BIOS. Date The date from 1 to 31 can be keyed by numeric function keys. Year The year depends on the year of the BIOS. Time The time format is <hour><minute><second>. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/<+>or PgDn/<­>to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If your hard disk drive type is not matched or listed, you can use Manual to define your own drive type manually. If you select Manual, related information is asked to be entered to the following items. Enter the information directly from the keyboard. This information should be provided in the documentation from your hard disk vendor or the system manufacturer. 29 If the controller of HDD interface is SCSI, the selection shall be "None". If the controller of HDD interface is CD-ROM, the selection shall be "None" Access Mode The settings are Auto Normal, Large, and LBA. Cylinder number of cylinders Head number of heads Precomp write precomp Landing Zone landing zone Sector number of sectors 3-5 Advanced BIOS Features CMOS Setup Utility ­ Copyright(C) 1984-2001 Award Software Advanced BIOS Features Anti-Virus Protection Recovery Genius PhoenixNet Support CPU L1 Cache CPU L2 Cache CPU L2 Cache ECC Checking Processor Number Feature Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Fouth Boot Device Swap Floppy Drive Boot Up Floppy Seek Boot Up NumLock Status Gate A20 Option Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) Security Option OS Select For DRAM > 64MB HDD S. M. A. R. T. Capability Report No FDD For Win 95 ¡ü ý ú û Disabled Enable Disabled Enabled Enabled Disabled Enabled Enabled Floppy HDD-0 LS120 Disabled Disabled Enabled On Fast Disabled 6 250 Setup Non-OS2 Disabled No Only for 618AS Pro/618AF Pro Menu Level > Allows you to choose the VIRUS warning feature for IDE Hard disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Optimized Defaults F1:General Help F7:Standard Defaults Anti-Virus Protection Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. [. . . ] This is a Sound Environment Simulator and Karaok function table NOTE: MAGIC INSTALL will auto detect file path: X:\CODEC\ALC201\SETUP. EXE (for WINDOWS 95/98/98SE/ME/NT4. 0/2000) 50 4-5 Install PROMISE ATA100/RAID Driver (Only for 618AS Pro-R/ 618AF Pro-R) (Read CD-PACK X:\MANUAL\PROMISE. DOC to get more information) 4-5-1 Install PROMISE ATA100 IDE Controller Driver When the Jumper setting ATA100 you will have next screen in Magic Install MENU. 1. Click PROMISE ATA100 Controller Driver in MAGIC INSTALL MENU 2. Install PROMISE ATA100 Controller Driver 3. Click Yes to Restart your computer after Driver Install Finish NOTE: The path of the file: For Windows 95/98 is X:\PORMISE\ATA100\WIN95-98 (including Win95/98) For Windows ME is X:\PORMISE\ATA100\WINME For Windows 2000 is X:\PORMISE\ATA100\WIN2000 For Windows NT4. 0 is X:\PORMISE\ATA100\NT4 51 4-5-2 Install PROMISE IDE RAID Controller Driver (Only for 618AS Pro-R/618AF Pro-R) When the Jumper setting in RAID Mode you will have next screen in Magic Install MENU. 1. Click PROMISE RAID Controller Driver when MAGIC INSTALL MENU 2. Install PROMISE RAID Controller Driver 3. Click Yes to Restart your computer after Driver Install Finish NOTE: The path of the file: For Windows 9X is X:\PORMISE\RAID\WIN9X-ME (including Win95/98/ME) For Windows NT4. 0 is X:\PORMISE\RAID\NT4 For Windows 2000 is X:\PORMISE\RAID\WIN2000 For Novell Netware is X:\PORMISE\RAID\NETWARE 52 4-5-3 Install PROMISE IDE RAID Controller Utility (Only for 618AS Pro-R/618AF Pro-R) 1. Click PROMISE RAID Controller Utility in MAGIC INSTALL MENU 2. In this screen please click Next to install PROMISE Monitoring Utility 3. Click Next to continue Setup PROMISE 4. FastTrak Controller Utility Select the components you want to install and click Next to Setup 5. Select Yes if you want the FastCheck Monitoring Utility automatically run after windows starts 6. Click Finish after complete Setup 53 7. After Windows restart click FastCheck Monitoring Utility you can monitor the RAID Status For detail information please read PROMISE. DOC in CD-PACK X:\MANUAL\PROMISE. DOC 4-6 PC-HEALTH installs SMART GUARDIAN software for hardware monitoring device 1. Click PC-HEALTH when MAGIC INSTALL MENU appears 2. Click OK when SMART GUARDIAN INSTALL appears 3. [. . . ]