Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JONSERED 500 M. We hope that this JONSERED 500 M user guide will be useful to you.
Lastmanuals help download the user guide JONSERED 500 M.
Detailed instructions for use are in the User's Guide.
[. . . ] Read the operator's manual carefully and make sure that you understand the contents before using the lawnmower. Read operating instructions carefully before using the mower. The manufacturer reserves the right to carry out product modifications without further notice. Guarantee, complaint Guarantee and complaint matters are dealt with in accordance with the Sale of Goods Act. [. . . ] Change oil after the first 2 hours of operation and then after every 25 working hours. Always change the oil while the engine is warm but not hot - never attempt any maintenance on a hot engine. Use fresh regular grade lead free petrol. NEVER USE LEADED PETROL Using leaded petrol will make the exhaust smoke and cause irreparable damage to engines fitted with a catalytic converter. Do not fill the fuel tank when the engine is hot. Do not fill the fuel tank while smoking. Do not fill the fuel tank while the engine is running. To avoid introducing dirt into the fuel system, wipe all grass and dirt from the petrol filler cap before unscrewing it. It is recommended that you fill the tank through a funnel with a filter. Fill the tank with unleaded petrol, do not mix with oil. (E1 - Briggs & Stratton) , (E2 - Tecumseh) 2. Do not fill with petrol while the engine is running. Any petrol spillage should be hosed away with water. Take care that water does not enter the engine. Starting the cold engine Push primer bulb firmly 3 times before starting cold engine. (Also, if the engine has stopped because it has ran out of fuel, refuel engine and push primer 3 times). (G1 - Briggs & Stratton) , (G2 - Tecumseh) 2. Starting the warm engine NOTE: Priming is usually unnecessary when restarting a warm engine. However, cool weather (550F/130C or below) may require priming to be repeated. Pull the Operator Presence Control all the way to the upper handle before you start the engine. The lever must be held in position to keep the engine running. Start the engine by pulling the starting handle firmly upwards. [. . . ] If the engine will still not start, immediately disconnect the spark plug lead. Disconnect the spark plug lead and allow the engine to cool down. Clean grass clippings and debris from around the engine and air inlets and the underside of the deck. Clean the engine air filter (Ask your local Approved Service Centre to clean the engine air filter thoroughly). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JONSERED 500 M
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JONSERED 500 M will begin.
