User manual JOYTECH 8.0 INCH DIGITAL LCD MONITOR

[. . . ] Do not mix old and new or different types of batteries. Remove the batteries when the product will not be used for an extended period of time. If the battery has leaked, be sure to carefully remove all residue before inserting new batteries. PHOTOSENSITIVE SEIZURE WARNING A very small percentage of people may experience a seizure when exposed to certain visual images, including flashing lights or patterns that may appear in video games. [. . . ] the selected setting will be highlighted in green. If the setting appears in red it cannot be changed while in the current input mode. It is important to correctly set up your Monitor when playing games or watching DVD movies in order to obtain the best possible picture quality. Using either the Input Selector Button located on the front of the Monitor or by selecting INPUT from the second OSD Menu, choose one of the following settings best suited to your requirements: Basic display setting GAME / DVD This is the default factory setting. When using this setting, games and DVD movies will be displayed in composite color mode. Advanced display setting GAME (RGB) Before using this setting make sure that your console is set to RGB mode within the PStwo® system configuration menu. When using this setting, only games will be displayed in full RGB (Red, green, blue) color. DVD movies will be displayed incorrectly with a `green screen effect'. Before using this setting make sure that your console is set to Y Cb/Pb Cr/Pr mode within the PStwo® system configuration menu. When using this setting, both games and DVD movies will be displayed in full component colour. The Low Voltage Indicator located on the In-Car Lighter Socket indicates when the car battery voltage has become low. when the Low Voltage Indicator illuminates red , it is recommended that the driver start the car to recharge the battery. The Power Indicator will illuminate green when the power is on. CAR BATTERY OPERATING TIME A minimum operating time of 2 to 3 hours can be expected with a typical car battery. In most instances 4 to 6 hours of operating time may be achievable. However, it is highly recommended that the car engine be started (By the driver) every 2 to 3 hours to recharge the battery. This will guard against any unexpected shutdown of the equipment and will ensure that there is always sufficient battery capacity to start the vehicle's engine. The In-Car Power Adapter may be used whether or not the vehicle's engine is running. The In-Car Power Adapter may not operate while the engine is starting since the battery voltage can drop substantially when the engine is being turned over. Always remove the In-Car Power Adapter from the car lighter socket when the vehicle is to remain unused for several days. The In-Car Power Adapter should only be used in locations that meet the following criteria: · Dry Do not allow water or other liquids to come into contact with the In-Car Power Adapter. Cool Ambient air temperature should be between 0°C and 40°C - ideal between 15°C and 25°C (60-80°F). [. . . ] Due to the millions of transistors (Pixels) used in the manufacturing process of LCD TFT Monitors, it is possible to sometimes have a non-performing transistor (Bright or dark pixels). manufacturers of LCD TFT Monitors expect this defect to occur to a limited extent. Therefore, there is no warranty for any dead pixels unless and until your display has 3 or more such dead pixels. Design and specifications are subject to change without notice. [. . . ]