User manual JUNIPER NETWORKS STRM 2008-2 TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008

[. . . ] NAT translates an IP address in one network to a different IP address in another network. Email Server - Specify the email server. If you do not have an email server, specify localhost in this field. · Step 4 Use the TAB key to navigate to the Finish option. Press Enter. A series of messages appear as STRM processes the requested changes. [. . . ] Press Enter. A series of messages appear as STRM processes the requested changes. After the requested changes are processed, the STRM system is automatically shutdown and rebooted. Re-Adding Managed Host(s) and Re-Assigning the Components To re-add the managed host(s) and re-assign component(s), you must: Step 1 Log in to STRM and access the System View in the Deployment Editor, as defined in Step 1, Removing Non-Console Managed Hosts. Re-add managed host(s) to your deployment. Step 2 From the menu, select Actions > Add a managed host. The Add a new host wizard appears. Step 3 Click Next. The Enter the host's IP window appears. Step 4 Enter values for the parameters: · · · Enter the IP of the server or appliance to add -- Specify the IP address of the host you wish to add to your System View. Enter the root password of the host -- Specify the root password for the host. Confirm the root password of the host -- Specify the password again, for confirmation. Step 5 Click Next. Step 7 Re-assign all components to your non-Console managed host. a b c In the STRM Deployment Editor, click the Flow View or Event View tab. Select the component you wish to re-assign to the managed host. From the menu, select Actions > Assign Note: You can also use the right mouse button (right-click) to access the Actions menu items. The Assign Component wizard appears. d From a Select a host drop-down list box, select the host you wish to re-assign to this component. Click Next. Release 2008. 2 Changing the Network Settings of a Non-Console in a Multi-System Deployment 5 e Click Finish. Step 8 Repeat for each non-Console managed host until all hosts are re-added and re-assigned. Step 9 From the Administrative Console menu, select Configurations > Deploy Configuration Changes. Changes are deployed. Changing the Network Settings of a Non-Console in a Multi-System Deployment To change the network settings of a non-Console in a multi-system deployment, you must remove all non-Console managed host from the deployment, change the network settings, re-add the managed host, and then re-assign the component(s). You must perform this procedure in the following order: · · · Removing the Non-Console Managed Host Changing the Network Settings Re-Adding the Managed Host and Re-Assigning the Components Note: This procedure requires you to use the Deployment Editor. For more information on using the Deployment Editor, see the STRM Administration Guide. Removing the Non-Console Managed Host To remove non-Console managed host from your deployment, you must: Step 1 Log in to STRM: https://<IP Address> Where <IP Address> is the IP address of the STRM system. Username: admin Password: <root password> Where <root password> is the password assigned to STRM during the installation process. Step 2 In the main STRM Interface, click Config. Step 3 In the main STRM Interface, click Config. Step 4 Click the deployment editor icon. Step 6 Select the managed host you wish to delete. Step 7 Use the right mouse button (right-click) to access the menu, select Remove host. Step 8 From the Administrative Console menu, select Configurations > Deploy Configuration Changes. Step 9 Exit from the Administration Console. Release 2008. 2 6 Note: If the Administration Console is still active on your system tray, use the right-mouse button (right-click) to access the menu and select Exit. [. . . ] Step 7 Re-assign all components to your non-Console managed host. a b c In the STRM Deployment Editor, click the Flow View or Event View tab. Select the component you wish to re-assign to the managed host. From the menu, select Actions > Assign Note: You can also use the right mouse button (right-click) to access the Actions menu items. [. . . ]