User manual JUNO JDA5530E

[. . . ] The use of an unprotected flame is dangerous for the filters and could cause fires. Therefore, never use an open flame under the hood. When frying foods, never leave the pan alone because the cooking oil could flare up. [. . . ] Apply the scheme supplied (Nº 49A) on the right of the cabinet so that the lines marked by the arrows match the cabinet ensuring that they meet at the back and under. Fix the hood to the cabinet using screws E (4, 5x16) supplied with the appliance (fig. Use the shim F supplied with the hood for 16 mm cupboard side panels. Fit the shim F to the left and to the right of the fixing curves of the hood and hook them in the holes. The hood model JDA 3830 is fitted with two motors. The speed of the motors is adjusted by means of a continuous sliding switch. the hood is provided with an intensive speed. Use the intensive speed switch only in case of high concentration of vapour. The hood should be switched ON several minutes before you start cooking and should be allowed to run until all the vapours have been eliminated. The hood may be mounted in cabinets with different depths. The back of the drawer can be adjusted so that the front of the removable drawer is the same depth as the cabinet. Proceed as follows: unscrew the screws G, move the square plates H as required and tighten the screw G (fig. The hood is supplied with a brown plastic front which can replace the white one already mounted. To mount the brown plastic front proceed as follows: -- Completely open the removable drawer L (fig. [. . . ] Therefore, we recommend observing these instructions. -- Remove the lamp cover R by pushing simultaneously two unlocking button S (Fig. 6) 'till having it completely removed. [. . . ]