User manual JUNO JUG 94721

[. . . ] Welcome to the world of Electrolux You've chosen a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. Electrolux ambition is to offer a wide variety of quality products that would make your life even more comfortable. You can look at some examples on the cover in this manual. But now it's time to study this manual and start using and enjoying the benefits from your new machine. [. . . ] Wherever possible the back of the product should be against a wall. This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from municipal authorities. The materials used on this appliance marked by the symbol are recyclable. Before using the appliance for the first time, wash the interior and all internal accessories with luke-warm water and some neutral soap so as to remove the typical smell of a brandnew product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. Pilot light Thermostat knob Super control light Normal/Super push button/ Reset sound signal alarm Warning light Insert the plug into the wall socket. Turn the thermostat knob (B), clockwise, beyond the «1» position. The pilot light (A) will light up and a sound is on only for 2 sec. , indicating that the appliance is powered. The warning light (E) will blink and the sound signal alarm will get on, indicating that the temperature inside the appliance is too high. Push the button (D), the sound signal alarm will get off and pushing the button a second time the super control light (C) light up. To stop operation, simply turn the thermostat knob to position «O» and a sound is on only for 2 sec The super control light (C) will then light up. If the quick-freezing function is not ended manually, the appliance switch off the quick-freezing function after 52 hours. The quick-freezing function can be ended manually at any time by pressing the button (D) again. The temperature alarm light blinks automatically whenever the temperature within the freezer rises above a certain value which might endanger satisfactory long-term conservation. It is perfectly normal for the temperature alarm light to remain flashed for a short time after the freezer is initially turned on. It will remain flashed until the optimum temperature for the conservation of frozen food is attained. [. . . ] When defrosting is completed, dry the interior thoroughly; keep the scraper for future use; 5. Turn the thermostat knob back to the required setting or replace the plug in the power socket. After letting the appliance run for at least half an hour, replace the previously removed food into the compartment. Important: Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. [. . . ]