User manual JUNO MCE5626.1W

[. . . ] Before installing and using the appliance read this user's instruction book carefully. it contains safety precautions , hints , information and ideas. If the refrigerator is used in compliance with the instructions written, it will operate properly and provide you with greatest satisfaction. The symbols below help you to find things more easily: Safety precautions Warnings and information at this symbol serve safety for you and your appliance. [. . . ] Do not use detergents or abrasive powders, as these will damage the finish. Remove safety elements used for transportation. To permit storage of food packages of various sizes, the shelves can be placed at different heights. To remove the internal shelf pull forward until it can be tipped up or down and removed. please do the same in reverse to insert the shelf at a different height. The glass shelf above the vegetable drawers and the bottle shelf should always remain in position, to ensure correct air circulation. Insert the plug into the wall socket and turn the thermostat knob clockwise beyond position «O» (OFF). The following effects are of significance in respect of the interior temperature: Ambient temperature Quantity and temperature of the food stored; Frequency with which the door is opened and how long it is left open To permit storage of food packages of various sizes, the central door shelf can be adjusted in height. Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. For more thorough cleaning, the top and bottom door sheves can be easily removed and refitted in position. Do not place warm foods inside the appliance. Bleeding part of the moisture of cooling chamber in form of frost and ice goes with the operation of the refrigerator. Thick frost and ice has an insulating effect, so it reduces cooling efficiency as the temperature increases and it needs more energy. At this type of appliance defrosting cooling compartment is automatic without any external intervention. The thermostatic control interrupts the operation of compressor at regular intervals for more or less time - during this cooling is interrupted - temperature of the cooling compartment increases and defrosting occurs. after defrosting the thermostatic control restarts operation of the system. Melting water flows through defrost water outlet into the evaporative tray maintained on the top of compressor and evaporates due to warmth of it. Check and clean the outlet of melting water coming during defrosting regularly. If it is clogged the melting water gathered can cause earlier failure as it can go to the insulating of the appliance. Never use metal objects for cleaning your appliance as it may get damaged. NEVER use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as these will damage the surface and leave a strong odour. nie Metallgegenstände um das Gerät zu reinigen , da es beschädigt werden könnte. [. . . ] Selective ordering of replacement parts can save unnecessary travel and costs. For this reason always provide the following appliance information: Model Name Model Number (PNC) Serial Number (S-No. ) This information can be found on the rating plate inside the cabenit on the left hand wall. We recommend that you enter this information here, so that it is handy if needed. [. . . ]