User manual JURA IMPRESSA E40

[. . . ] IMPRESSA E40 IMPRESSA E45 IMPRESSA E60 IMPRESSA E65 Instructions for use Art. 62902 5/05 Jura Impressa E40/E45/E60/E65 English. 5 ­ 19 = Note = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. juraworld. com Fig. 9 2 1 Operating elements Jura Impressa E40/E45/E60/E65 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Water quantity switch Powder coffee selection switch Coffee key for 2 cups Maintenance key (for functions such as: rinsing, cleaning, de-scaling, filter) Coffee key for 1 cup ON/OFF switch Display with symbols Water tank with carrying handle Height-adjustable coffee spout Pre-ground coffee filler funnel Cover for beam container Selector switch for hot water/steam Pivoting nozzle for hot water/steam Frothing aid Container for coffee grounds Drip tray cover Drip tray 9 8 7 6 5 4 3 2 1 10 11 12 13 14 15 16 17 Contents Jura Impressa E40/E45/E60/E65 1. [. . . ] To finish the process, turn the selector switch for hot water/ steam (12) back to the position. At the start of a water draw-off, there can be splashes. The pivoting nozzle for hot water/steam gets hot. Please avoid direct contact with the skin. 11 9. 1 Drawing off hot water E45 Install the hot water nozzle to optain perfect water flow. This is included in your Welcome Pack. 11. 3 No drip tray If the properly. symbol flashes, the drip tray has not been inserted 10. Switching machine off When the machine is switched off, the rinsing programme is automatically started. Therefore, place an empty container under the coffee-spout and press the ON/OFF switch. When the rinsing water has run into the cup, the machine switches off. Throw the rinsing water away. If the drip tray has not been put into the machine, you can clean the interior of the machine. Wipe out any coffee powder that might be in the machine with a damp cloth. Put the drip tray back in again. 11. 4 Clean unit After 200 draw-offs or 160 rinses, the machine must be cleaned; the symbol flashing announces this. You can continue to draw off coffee or hot water/steam. We recommend carrying out the cleaning (as described in point 12) within the next few days. Warning lamp does not go out until the complete cleaning prozess has been carried out. 11. Care and maintenance 11. 1 Fill water When the display lights up, no drawing-off is possible. Fill with water as described under point 3. 3. 11. 2 Empty grounds container The grounds container collects the coffee grounds. When this display lights up, no drawing-off is possible and the grounds container must be emptied. Empty and clean the drip tray and the grounds container (Fig. Push the drip tray and then the grounds container back in (Fig. The drip tray must also be emptied when you empty the grounds. 11. 5 Unit scaled Scale is caused by using the machine and depends upon the hardness level of your water. The machine recognises the necessity of de-scaling. [. . . ] The de-scaling process is continued and the water is guided into the drip tray in the interior of the machine. If the symbol lights up, empty the drip tray and put it back in again. After this, press the maintenance key (4). Your machine rinses and is now ready for the next draw-off of coffee. 15 14. [. . . ]