User manual JURA IMPRESSA F90

[. . . ] IMPRESSA F90/F9 Instructions for use Art. 66379 9/06 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. jura. com Fig. min. 8 7 6 5 4 3 2 1 9 10 11 12 13 Control elements A) B) C) D) E) F) G) H) I) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Display dialog system Symbols (navigation in programming mode) Large cup Coffee Espresso Start (to start the draw-off operation) Coffee strength «mild» Coffee strength «Normal» Coffee strength «strong» Programming key Selection key for pre-ground coffee Draw-off key 1 cup Draw-off key 2 cups ON/OFF key Maintenance key Connectivity socket Control panel Filler funnel key for pre-ground coffee Bean tank cover Water tank with handle Water portion draw-off key Steam portion draw-off key Professional Cappuccino Frother with milk pipe Interchangeable hot water nozzle (see Fig. [. . . ] You will not be prompted by your IMPRESSA to rinse the Professional Cappuccino Frother. 11. 3 Rinsing the Professional Cappuccino Frother Carefully pull off the Professional Cappuccino Frother from your IMPRESSA. Dismantle the Professional Cappuccino Frother (14) into its individual parts (Fig. Thoroughly rinse all parts of the nozzle under running water. Reassemble the Professional Cappuccino Frother (14) and refit it on to your IMPRESSA. 11. 4 Cleaning the Professional Cappuccino Frother To ensure that the Professional Cappuccino Frother (14) functions perfectly, you should clean it daily if you have prepared milk foam or hot milk. You will not be prompted by your IMPRESSA to clean the Professional Cappuccino Frother (14). 14 You can obtain the JURA Auto-Cappuccino Cleaner from the specialist shop. Place a receptacle under the Professional Cappuccino Frother (14) (Fig. Fill a second receptacle with 2. 5 dl of fresh water and add one capful of the Auto-Cappuccino Cleaner. Dip the milk pipe into the second receptacle with the Auto-Cappuccino Cleaner. 13) Turn the selector switch of the Professional Cappuccino Frother (14) to the milk position (Fig. PLEASE SELECT Press the steam portion draw off key (13). MACHINE HEATING UP PLEASE SELECT Press the steam portion draw off key (13) again. Draw steam until the receptacle with the Auto-Cappuccino Cleaner is empty. This procedure cleans the Professional Cappuccino Frother and the milk pipe. Fill the receptacle with 2. 5 dl of fresh water. Dip the milk pipe into the receptacle with the fresh water. MACHINE HEATING UP PLEASE SELECT Press steam draw-off key again. STEAM PORTION Draw steam until the receptacle with the fresh water is empty. This procedure rinses the Professional Cappuccino Frother (14) and the milk pipe with fresh water. Cleaning of the Professional Cappuccino Frother (14) is now complete, your IMPRESSA is ready for use. 12. Switching off the coffee machine To ensure perfect operation, please switch your IMPRESSA to standby mode with the symbol first. Then switch the machine off with the power switch (21). Use the key to switch on the coffee machine. PLEASE SELECT Use key to switch OFF your coffee machine. [. . . ] The smaller the coffee you want to draw off, the more important preheating is. Sugar and cream Stirring coffee/tea will result in heat being released. Adding refrigerated cream or milk will reduce the temperature of the coffee significantly. E 17. Disposal Please dispose of old machines in an environmentally compatible way Old machines contain valuable materials capable of being recycled which should be salvaged for recycling. [. . . ]