User manual JURA IMPRESSA J9.3 ONE TOUCH TFT QUICK GUIDE

[. . . ] IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide The `IMPRESSA J9. 3 One Touch TFT Instructions for Use' together with these short instructions `IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide' has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-tounderstand style, its thoroughness and coverage of safety aspects. IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide J These short instructions do not replace the `IMPRESSA J9. 3 One Touch TFT Instructions for Use'. Make sure you read and observe the safety information and warnings first in order to avoid hazards. Rinsing the machine You can initiate the rinse operation manually at any time. Precondition: `Please select product:' is displayed. T Place a receptacle under the coffee spout. [. . . ] Set the date on the date plate on the filter holder in the water tank. E If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter. Precondition: `Change filter' is displayed. `Maintenance status (1/6)' T Press the `Change the filter' button. `Change the filter' E If you do not want to start changing the filter just yet, press the `' button. The prompt `Change filter' remains active. `Change filter' T Remove and empty the water tank. T Open the filter holder and remove the old CLARIS Blue filter cartridge and filter extension. T Fit the filter extension on top of a new filter cartridge. T Insert the filter cartridge into the water tank, exerting slight pressure. T Fill the water tank with fresh, cold water and reinsert the tank. 5 IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide T Place a receptacle (at least 500 ml) under the cappuccino frother. T Turn the setting wheel of the cappuccino frother to the Steam position n. `Filter is being rinsed. ', water flows out of the cappuccino frother. E You can interrupt rinsing of the filter at any time by pressing any button. Press the Rotary Switch k to continue rinsing of the filter. E The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 500 ml. `Please select product:' appears on the display. Cleaning the machine CAUTION After 200 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E The cleaning programme lasts approximately 20 minutes. [. . . ] E If you use a CLARIS Blue filter cartridge and this is activated, you will not be prompted to descale. Precondition: `Decalcify machine' is displayed. `Maintenance status (1/6)' T Press the `Descale' button. `Descale' E If you do not want to start descaling just yet, press the `' button. [. . . ]