User manual JURA XS90

[. . . ] The IMPRESSA XS95/XS90 One Touch Manual E K Original instructions for use Before using the machine read the instructions for use. The `IMPRESSA Manual' has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects. JURA Type 668 Table of contents Your IMPRESSA XS95/XS90 One Touch Control elements 4 6 Proper use For your safety 6 The IMPRESSA XS95/XS90 One Touch Manual 8 Symbol description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1 Preparing and using for the first time 9 © Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 JURA on the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] T Place a cup under the hot water spout. ö T Use the selector switch to select the hot water portion symbol a. TEMPERATURE and the pre-set temperature are displayed. E By pressing the selector switch several times (within approx. 2 seconds) you can set the temperature to your individual preference. This setting is not saved. CAUTION HOT WATER, the pre-set amount of water flows into the cup. COFFEE READY appears on the display. 27 4 Permanent settings in programming mode 4 Permanent settings in programming mode Products With the PRODUCTS programme item you can enter individual settings for all coffee and milk specialities as well as hot water. The following permanent settings can be made: Product 1 Espresso, 1 Coffee Amount Coffee strength Temp. 25 ML ­ 240 ML ö (xmild), öö (mild), ööö (normal), öööö (strong), ööööö (xstrong) ­ ­ NORMAL, HIGH 2 Espressi, 2 Coffees Coffee à la Carte Latte macchiato, Cappuccino 25 ML ­ 240 ML (per cup) NORMAL, HIGH NORMAL, HIGH NORMAL, HIGH 25 ML ­ 240 ML Amount of milk: 3 SEC ­ 120 SEC Pause: 0 SEC ­ 60 SEC Amount of water: 25 ML ­ 240 ML ö (xmild), öö (mild), ööö (normal), öööö (strong), ööööö (xstrong) ­ ­ ­ ­ Milk portion Milk Hot water 3 SEC ­ 120 SEC ­ ­ ­ ­ Hot water portion 25 ML ­ 450 ML LOW, NORMAL, X HIGH LOW, NORMAL, X HIGH Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the amount of milk of latte macchiato from 16 SEC to 20 SEC, the pause from 30 SEC to 40 SEC and the amount of water from 45 ML to 40 ML. Precondition: COFFEE READY is displayed. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until PRODUCTS is displayed. 28 4 Permanent settings in programming mode k T Press the Rotary Switch to enter the programme item. SELECT PRODUCT E Next select the product button for which you would like to make settings. No product is prepared during this procedure. q T Press the Latte Macchiato button. COFFEE 45 ML k T Press the Rotary Switch to enter the programme item. COFFEE 45 ML g T Turn the Rotary Switch until COFFEE 40 ML is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display. COFFEE 40 ML g T Turn the Rotary Switch until MILK 16 SEC is displayed. k T Press the Rotary Switch to enter the programme item. MILK 16 SEC g T Turn the Rotary Switch until MILK 20 SEC is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display. MILK 20 SEC g T Turn the Rotary Switch until PAUSE 30 SEC is displayed. k T Press the Rotary Switch to enter the programme item. PAUSE 30 SEC g T Turn the Rotary Switch until PAUSE 40 SEC is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED w appears briefly on the display. PAUSE 40 SEC g T Turn the Rotary Switch until EXIT is displayed. [. . . ] T Descale the water tank (see Chapter 5, `Maintenance ­ Descaling the water tank'). FILL WATER TANK is displayed although the water tank is full. 50 7 Troubleshooting Problem Cause/Result If the machine was exposed to the cold for a long period of time, it is disabled from heating up due to safety reasons. ­ Action T Warm up the machine at room temperature. ERROR 2 is displayed. Other ERROR messages are displayed. T Turn the IMPRESSA off at the power switch. Contact Customer Support in your country (see `JURA contact details / Legal information'). E If you have not been able to solve the problem, contact Customer Support in your country (see `JURA contact details / Legal information' ). 51 8 Transport and environmentally neutral disposal 8 Transport and environmentally neutral disposal Transport / Emptying the system Keep the packaging for your IMPRESSA. It should be used to protect the machine during transportation. [. . . ]