User manual JVC AV-21QS5SN

[. . . ] AV-21QS5SN ENGLISH FRANÇAIS DEUTSCH ITALIANO NEDERLANDS SVENSKA NORSK DANSK SUOMI COLOUR TELEVISION TELEVISEUR COULEUR FARBFERNSEHGERÄT TELEVISORE A COLORI KLEURENTELEVISIE FÄRG- TV FARGEFJERNSYN FARVEFJERNSYN VÄRITELEVISIO INSTRUCTIONS MANUEL D'INSTRUCTIONS BEDIENUNGSANLEITUNG ISTRUZIONI GEBRUIKSAANWIJZING BRUKSANVISNING BRUKSANVISNING INSTRUKTIONSBOG KÄYTTÖOHJE 50069181 ©2005 VICTOR COMPANY OF JAPAN, LIMITED 1004TKH-VT-VT Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Antenna Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] or, Enter the Feature Menu directly, pressing the YELLOW button. TV or AV-1 can be chosen by pressing or button on "AV-2 OUTPUT". Sleep Timer: As you enter the feature menu, SLEEP TIMER will be the first selected option. Use or button to change the value of the sleep timer between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00. Your TV will get into standby mode when the period you selected passes after you make the selection. It is displayed on the upper right of the screen. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds. Install. Menu Press MENU button, now you are in main menu. using or button, then enter the Installation menu pressing or button. or Enter the Installation Menu directly, pressing the BLUE button. ENGLISH - 7 - To programme a channel in a TVs programme number manually: 1. PROGRAMME will be the first selected item as you enter the INSTALL. Pressing or button select the programme number where you want to the tuned channel to be stored. (You may also type the programme number using the digit buttons. ) Program. (Programming) menu is used to display the programme names and numbers. You can use this menu to delete a channel, to insert a channel and to autostore the programmes. menu pressing or button and open it pressing or button. When you enter the programme menu, all the programme numbers and names will be displayed on the screen. The programme number and name of the tuned channel will be shown by the cyan color. All the other channel numbers will be white. You can move the number in cyan using or or or button. Also, it's possible to use digit buttons to select programme numbers. As you pass through the programme numbers this way, to reach the programme number you want, the channels corresponding to the programme numbers you pass through will be tuned and the selected programme number will be shown in cyan. 2. Using or button to select the band in which you want to search a channel. (Press button to search forward. Press button to search backwards. ) If the found channel is not the desired one, press or button to start searching again. [. . . ] You can watch images from that equipment to select the programme number which you stored the test signal. Sound Sound is coming from only one of the speakers. Is the balance set to one direction extreme?See SOUND menu. Remote Control Your TV no longer responds to the remote control. Press the STANDARD button on the remote control once more. [. . . ]