User manual JVC AV-28WT2

[. . . ] COLOUR TELEVISION AV-24WT2EK AV-28WT2EK CONTENTS SAFETY PRECAUTIONS . . . . . . . . . 2 Locations of remote control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Locations of TV buttons and parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PREPARATION AND BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 2. Press OK. The MENU appears. To adjust the picture OFF Press / to select PICTURE SETTING, then press OK. The PICTURE SETTING menu appears. 1. 2. Press OK. The MENU appears. Press / to select PICTURE SETTING, then press OK. The PICTURE SETTING menu appears. 3. Press / to select an item, and press / to adjust it. Item Weaker BASS Stronger (low frequency sound) Weaker TREBLE Stronger (high frequency sound) Left BALANCE (audio balance) Right 3. Press / to select COLOUR SYSTEM. PICTURE SETTING TINT CONTRAST BRIGHT SHARP COLOUR HUE ECO MODE COLOUR SYSTEM 4:3 AUTO ASPECT OK:OK TV:EXIT :RESET NORMAL OFF NTSC3. 58 REGULAR PICTURE SETTING TINT CONTRAST BRIGHT SHARP COLOUR HUE ECO MODE COLOUR SYSTEM 4:3 AUTO ASPECT OK:OK TV:EXIT :RESET NORMAL OFF PAL REGULAR 4. Press OK. This completes the setting. 4. 3. Press / to select the appropriate colour system. PAL: PAL system. AUTO: Automatic colour system selection. Notes: · Auto may not function properly depending on signal quality. If the picture is abnormal in AUTO mode, select another colour system manually. · When in TV mode (PR 1 to PR 99), you cannot select AUTO, NTSC 3. 58 or NTSC 4. 43. · When in TV mode (PR 0), you cannot select NTSC 3. 58 or NTSC 4. 43. Press / to select an item, and press / to adjust it. CONTRAST ECO MODE When you set ECO MODE to ON, the screen contrast is automatically adjusted to a setting suitable for the brightness of your room. This reduces eye strain and the power consumption of the TV. · To return to the default settings, press blue button. Item Lower Darker Softer Lighter Reddish CONTRAST Higher (picture contrast) BRIGHT Brighter (picture brightness) SHARP Sharper (picture sharpness) COLOUR Deeper (picture colour) HUE Greenish (picture hue) 1. 2. Press OK. The MENU appears. Press / to select PICTURE SETTING, then press OK. The PICTURE SETTING menu appears. 3. Note: · You can adjust the HUE (picture hue) only when the colour system is NTSC 3. 58 or NTSC 4. 43. Press / MODE. to select ECO NORMAL 5. Press OK. This completes the setting. 4. Press OK. This completes the setting. To adjust the sound PICTURE SETTING TINT CONTRAST BRIGHT SHARP COLOUR HUE ECO MODE COLOUR SYSTEM 4:3 AUTO ASPECT OK:OK TV:EXIT :RESET OFF PAL REGULAR 1. Press OK. The MENU appears. 4. 5. Press OFF. / to select ON, Press OK. This completes the setting. · If you turned on ECO MODE, the ECO lamp lights. 13 OTHER FEATURES INFORMATION You can display the PR LIST or the current time. SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. Note: · The SLEEP TIMER does not turn off the Main power. BLUE BACK When viewing a PR channel with no or poor reception, or if there is no input from an external device, you can mute the sound and change the picture into a blue picture. 1. Press (Information) repeatedly. The display changes cyclically in the following order. PR LIST PR AV 1 2 3 4 5 6 7 8 9 TV :EXIT OK:OK 1. 2. Press OK. The MENU appears. 1. 2. Press OK. The MENU appears. ID ----BBC1 BBC2 ITV CH4 CH5 Press / to select FEATURES, then press OK. The FEATURES menu appears. FEATURES SLEEP TIMER BLUE BACK CHILD LOCK TV:EXIT OK:OK Press / to select FEATURES, then press OK. The FEATURES menu appears. FEATURES SLEEP TIMER BLUE BACK CHILD LOCK TV:EXIT OK:OK 3. 21:30 Current time Press / to select SLEEP TIMER, then press OK. The SLEEP TIMER menu appears. SLEEP TIMER 60 OFF OK:OK TV:EXIT 120 3. Press / to select BLUE BACK, then press OK. The BLUE BACK menu appears. BLUE BACK ON OFF TV:EXIT OK:OK No indication 4. Press / to select a period of time. You can set the period of time a maximum of 120 minutes in 10 minute increments. 4. 5. Press OFF. / to select ON or Press OK. This completes the setting. About PR LIST: · Ten positions including the currently selected PR channel will be displayed as a list. Press / / / to select the desired PR channel. About the current time display: This TV uses teletext data to determine the current time. · If the TV has not received a station that has teletext data since it was turned on, the time display is blank. To view the current time, select a station that is broadcasting teletext data. As long as you do not turn off the TV, then even if you select other stations, the time will still be displayed. OFF: Turns off the SLEEP TIMER. 5. Press OK. The selected period of time is displayed for approx. 3 seconds. SLEEP TIMER 60 · The Sleep timer lamp lights if you set the SLEEP TIMER. To display the remaining Sleep timer time: Perform steps 1 to 3 to display the SLEEP TIMER menu, and press OK button when you finish checking the time. To turn off the Sleep timer: Perform steps 1 to 3 to display the button to SLEEP TIMER menu, press select "OFF", and then press OK button. Note: · One minute before the SLEEP TIMER turns off the TV, "GOOD NIGHT!" appears. [. . . ] Select the correct colour system manually (see page 13). The ZOOM mode's automatic selective function is working (see page 16). Move the components apart until the interference is eliminated. Replace with an aerial with better directionality. [. . . ]