User manual JVC AV-36F704 Instruction Manual

[. . . ] Color Television Users Guide For Models: AV-36FA54 AV-32FA54 AV-27FA54 AV-36FA44 AV-32FA44 AV-27FA44 AV-36F704 AV-32F704 AV-27F704 Illustration of AV-32FA54 and RM-C1250G Important Note: In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use. [. . . ] Press the MENU button To AUTO TUNER SETUP To operate To choose CABLE or AIR To move to START To start Auto Tuner Setup ® ® ® Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER!appears onscreen. Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Press the MENU button To CHANNEL SUMMARY To operate ® The Channel summary screen will now be displayed with the channels set to scan marked with an "¸". You can delete channels from the scan by removing the "¸". If any channels were missed during auto tuner setup and you wish to add them, you may by placing an "¸" next to the channel number. To the SCAN column To include or delete from scan Press the EXIT button when finished ® You can block access to a channel by activating the channel lock. Press the MENU button To CHANNEL SUMMARY To operate To the Lock Column ( ) Press the ZERO button to lock or unlock that channel Press the EXIT button when finished ® 25 Initial Setup Channel Guard Message When a viewer attempts to watch a guarded channel, the following message appears: To watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message "INVALID LOCK CODE!" will flash on the screen. The channel cannot be accessed until the correct code is entered. Notes: · Once a channel has been unlocked, it will remain unlocked until the television is turned off. · See also "Set Lock Code", page 32. V-Chip Your TV is equipped with V-Chip technology which enables you to block channels or content that you feel to be inappropriate for children, based on US and Canada rating guidelines. V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection. Note: Some programs, and movies are broadcast without a ratings signal. Even if you set up V-CHIP ratings limits, these programs will not be blocked. See page 27 for information on how to block unrated programs. Note (for Canadian viewers): The V-Chip function is based on specifications designed for the United States and therefore may not work properly in Canada. You can customize the V-Chip settings of your television to match your personal tastes. The V-Chip menu below is the starting point for your V-Chip settings You can use US V-Chip settings (for programming broadcast from the United States), Canadian V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each of the three V-Chip formats appear in the next six pages along with descriptions of the rating categories. [. . . ] Televisions with a screen size of 25 inches and larger may be covered on an in-home basis where such service is available. WHAT YOU MUST DO FOR WARRANTY SERVICE: To determine if in-home service is available in your area, either contact the selling dealer (retailer) or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service locations can also be obtained from our website http://www. jvcservice. com. In-home service, if available, will require clear access to the Television by the service representatives. [. . . ]