User manual JVC C-13011

[. . . ] COLOR TELEVISION USER'S GUIDE For models: C-13010 C-13011 C-20010 AV-20020 AV-20021 AV-27015 AV-27020 (Illustration of AV-27020 and RM-C345) IMPORTANT NOTE TO THE CUSTOMER: In the spaces below, enter the model and serial number for your television (located on the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use. Model Number Serial Number IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:To reduce the risk of electric shock. [. . . ] 3) Press VCR POWER and check if the accessory responds. 4) If there was a response, press RETURN+. If there was no response, repeat Step 3 until there is a response. If you repeat Step 3 more than 80 times and there is still no response, use the accessory remote. 12 USING THE MENU USING THIS GUIDE: Throughout this guide there are certain symbols we use as shorthand to show you what to do. When you see them, keep these factors in mind: Up and down arrows mean press the MENU UP or MENU DOWN buttons. Pressing the up or down buttons allows you to: · Move vertically in the main menu screen · Move through a submenu, or · Move to the next letter, number, or other choice in a submenu, or · Back up to correct an error · Channel Up and Down Left and right arrows mean press the MENU LEFT or MENU RIGHT button to: · Select the highlighted item, or · Select the options in a submenu · Volume Up and Down The "Press Button" means you should press that button on the remote control Ì Important information, or a note, about a feature follows a cube like this one. SMALL CAPITAL LETTERS are used when we refer to buttons . . . this is important because some menu functions have the same name. PICTURE SETTINGS TINT COLOR PICTURE BRIGHT DETAIL SELECT OPERATE -------------||-------------------------||-------------------------||-------------------------||-------------------------||------------BY BY EXIT BY EXIT PICTURE SETTINGS SCREEN 2 NOISE MUTING SET VIDEO STATUS ON OFF SELECT OPERATE BY BY EXIT BY EXIT SOUND SETTINGS (Stereo Models Only*) BASS TREBLE BALANCE MTS TV SPEAKER SELECT OPERATE BY BY -------------||-------------------------||-------------------------||------------STEREO SAP MONO ON AIR THE ONSCREEN MENUS: To bring up the onscreen menu, press the MENU button on the remote, and the menu will appear on the screen. The item that appears yellow is the selected item. When you first turn on the TV, the "Picture Settings" menu will appear. However, "Initial Setup" is so important, that this guide begins here. ON OFF EXIT BY EXIT GENERAL ITEMS SET CLOCK ON/OFF TIMER LANGUAGE CLOSED CAPTION BACKGROUND SELECT OPERATE BY BY ENG FRE SPA INITIAL SETUP ITEMS AUTO TUNER SETUP CHANNEL SUMMARY SET LOCK CODE SELECT OPERATE BY BY EXIT BY EXIT BLACK CLEAR EXIT BY EXIT Ì If you use the MENU button on the TV's front panel, an additional menu indicating the current channel and the TV/Video status will appear between the last initial setup menu and the picture settings menu. *AV-27015 does not have TV Speaker. INITIAL AUTO TUNER SETUP During Auto Tuner Setup, the TV will automatically scan through all available channels and memorize the active ones so that when you scan, you do not pick up weak or noisy channels. Press the MENU button To AUTO TUNER SETUP To operate ADD TUNER MODE : START CABLE AIR SETUP 13 CHANNEL SUMMARY You can add or delete channels from the channel scanning. You can also lock out any "unauthorized" viewers from one or up to all 181 channels. Press the MENU button To CHANNEL SUMMARY To operate NOTES: During Initial Setup, the TV will be programmed to only receive active channels. Once the channels are activated by the Auto Tuner Setup they will be included in Scan. Some weak channels may be included or omitted during this procedure. You can add or delete any channels for scanning in the Channel Summary. Noise Muting will not work while you operate the Channel Summary. To choose CABLE or AIR To move to START To start Auto Tuner Setup NOW PROGRAMMING!48 You can manually set channels to scan that were too weak to be picked up during Auto Tuner Setup. (If you have not performed the Auto Tuner Setup, in previous column, do so now. ) Conversely, if a channel was too weak to receive a good picture but was picked up anyway, delete it by removing the X. CH 01 02 03 04 05 ADD ­ X X X X : : : : : : CH 06 07 08 09 10 ADD X ­ ­ X X The Programming takes approximately 1 to 2 minutes PROGRAMMING OVER! ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ Note: Noise Muting will not work while Auto Tuner Setup is working. To the ADD column To include or delete from scan EXIT when finished Note: Channels set to scan will be marked with an X. Note: Some cable systems experience interference from radio frequencies on Cable Channel 95. [. . . ] If you have questions concerning your JVC product, please contact our Customer Relations Department: JVC COMPANY OF AMERICA 1700 Valley Road DIVISION OF JVC AMERICAS CORP. Wayne, New Jersey 07470 Refurbished products carry a separate warranty. This warranty does not apply for details of refurbished product warranty. Please refer to the refurbished product warranty information packaged with each refurbished product. AUTHORIZED SERVICE SERVICE C E N T E R S 23 QUALITY HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www. jvcservice. com Dear Customer; In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. [. . . ]