User manual JVC DLA-HD100

[. . . ] CAUTION: To reduce the risk of electric shock, do not remove cover. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. About the installation place Do not install the projector in a place that cannot support its weight securely. If the installation place is not sturdy enough, the projector could fall or overturn, possibly causing personal injury. [. . . ] Y Pb/Cb Pr/Cr RGB SCART Select this when component video signals are input. Select this when RGB video signals are input. Select this when RGB video signals and sync signals are input from SCART plug for European market. This setting is available only when projecting the component video input. Select this when Y Cb Cr (4:4:4) video signals are input. Select this when Y Cb Cr (4:2:2) video signals are input. Select this when RGB video signals are input. This setting is available only when projecting the HDMI input. This setting can also be configured from the remote control. V Film Mode Select this to view movies shot on film. auto Off For normal circumstances , select this setting. Select this when you are not watching movies shot on film. This setting is not available when PC signals are input to HDMI terminal. This setting is available only when projecting the video or S-video input. 5 % Select this when the gradation of the dark portions of an image is indistinct with the 7. Select this when the dark portions of an image appear washed out with the 0 % setting. This setting can only be adjusted when NTSC signals are input to the video or S-video input terminal. Upper left Upper centre Upper right Left centre Centre Right centre Lower left Lower centre Lower right Displays menu on the upper left of the screen. A Line Display Sets whether to display the input when switching input. B Flip H Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling. Off On Do not flip image to the left or right. C Flip V Select this when the projector is hung from the ceiling. [. . . ] Otherwise, use a cloth to wipe off the dirt. If dirt is allowed to accumulate in the air inlets, the internal temperature cannot be adjusted and this may cause a malfunction. Dirt on the lens Clean the dirt using commercial blowers or lens cleaning papers for cleaning glasses and cameras. This may lead to peeling of the surface coating film. [. . . ]