User manual JVC DLA-X35

[. . . ] Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities or for USA, the Electronic Industries Alliance: http://www. Only) CAUTION: Changes or modification not approved by JVC could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. [. . . ] * SD is the abbreviation for Standard Definition. 0 * MPC is the abbreviation for Multiple Pixel Control. About the analysis screen By press the [MPC] button while the adjustment menu in the step 1 is on screen, the analysis screen is displayed. In the analysis screen, parts where the effect appear are highlighted in colors when “Enhance”, “Dynamic Contrast”, and “Smoothing” are adjusted. 3 Press the [MENU] button to exit To display the adjustment menu, operate any of the keys while the analysis screen is displayed. No adjustment can be made while the analysis screen is displayed. Make adjustments after returning to the adjustment screen. 40 Fine-tuning the Image Quality Adjusting the Output Value of the Projected Image (Gamma) You can adjust the output value of the projected image with respect to the video signal input. The photos are for illustrative purposes only. 255 Increases the contrast with respect to the original image, creating a greater sense of depth. output Value 0 0 Input Value 255 . The photos are for illustrative purposes only. 1 Press the [GAMMA] button 0 Adjust/Set Pressing the [GAMMA] button each time switches the setting in sequence. * The setting value varies with the model in use, as well as the input signal and Picture mode. gamma adjustment settings A Setting A (3D) B (3D) C (3D) Normal A B C D Custom 1 to Custom 3 0 0 0 Input Signal 3D Description Recommended setting when viewing 3D movies. The overall image appears brighter than that in “A (3D)”. The overall image appears to have a greater sense of depth than that in “A (3D)”. 2D Recommended setting for normal viewing. Places more emphasis on the gradation compared to the “Normal” setting. Image with a sense of depth that is characteristic of films. image contrast is enhanced compared to the “B” setting. Image with brighter midtones compared to the “Normal” setting. [. . . ] €LAMP” lights up (orange) STANDBY/ON LAMP AM WARNING When lamp replacement is near (lamp time has exceeded 2900 hours) . Others 81 Warning display You can tell the details of a warning from the (repeated) displays of the “WARNING” and “LAMP” indicators. The “STANDBY/ON” indicator, which shows the operating mode of the unit, is displayed simultaneously as described above. The Warning mode is activated once the message is displayed. [. . . ]