User manual JVC GR-DVF11

[. . . ] ENGLISH CONTENTS SAFETY PRECAUTIONS PROVIDED ACCESSORIES GETTING STARTED 2­5 5 6 ­ 11 DIGITAL VIDEO CAMERA GR-DVF21 GR-DVF11 Please visit our CyberCam Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Date/Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Loading/Unloading A Cassette . . . . . . . . . . . . . . . 9 Recording Mode Setting . . . . . . . . . . . . . . . . . . . . . [. . . ] If you are using the GR-DVF21, it is also possible to transfer still images to a PC by using the provided software. Connector cover* 1 2 3 To PC Make sure the camcorder and PC are turned off. Connect the camcorder to your PC using the appropriate cable as shown in the illustration. Turn the camcorder's Power Switch to " turn on the PC. " and To DV IN/OUT (GR-DVF21 only) DV cable (optional) PC connection cable (provided) NOTES: It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder. The date/time information cannot be captured into the PC. Refer to the instruction manuals of the provided software (GR-DVF21 only). Also refer to the manufacturer's instruction manual for the DV connector-equipped capture board. To DV connector To RS-232C PC with DV connector-equipped capture board PC * When connecting cables, open this cover. EN35 Power Switch Connection To A Video Unit Equipped With A DV Connector Connection to the GV-DT3 Digital Printer (optional) allows you to print out images or transfer them to a PC. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. This function is called Digital Dubbing ( pg. 37), which offers virtually no image or sound deterioration. Connector cover* To DV IN/OUT 1 2 3 4 Make sure all units are turned off. Make connections to the device you want to connect to using a DV cable, as shown in the illustration. If necessary, connect a PC connection cable to the printer's PC connector and the PC's RS-232C connector. Turn the camcorder's Power Switch to " turn on the other units. " and DV cable (optional) To DV IN connector To DV connector Video unit equipped with a DV input connector NOTES: It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. For Digital Dubbing, this camcorder can be connected only to one device at a time. This camcorder can also be used as a recorder ( pg. If Still Playback, Slow-Motion Playback, Fast-Forward or Rewind is attempted with the camcorder connected to a video unit via the DV connector, the image will take on an effect similar to a colored mosaic pattern or it will become black. Also refer to the instruction manuals of the connected units. To PC connector Digital Printer PC connection cable (provided with GV-DT3) To RS-232C PC * When connecting cables, open this cover. PLAYBACK 36 EN TAPE DUBBING Tape Dubbing 1 2 The connectors are located beneath the cover. To Video Output* White to Audio Output L To S-Video Output Red to Audio Output R Following the illustration, connect the camcorder and the VCR. Set the camcorder's Power Switch to " ", turn on the VCR's power, and insert the appropriate cassettes in the camcorder and the VCR. [. . . ] Exposure Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 F Fade-In/Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fast-Forward The Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T Tele Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Time Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]