User manual JVC GR-DVL355

[. . . ] You may install and use the Program on a HDD or other storage devices incorporated in Your PC. (2) You may make one (1) copy of the Program solely for your personal backup or archival purposes. 3 RESTRICTION ON THE PROGRAM (1) You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the extent that expressly permitted by applicable law. (2) You may not copy or use the Program, in whole or in part, other than as expressly specified in this Agreement. (3) You have no right to grant a license to use the Program, and may not distribute, rent, lease or transfer the Program to any third party or otherwise let them use the Program. 4 LIMITED WARRANTY JVC warrants that any media in which the Program is embodied are free from any defects in materials and workmanship for a period of thirty (30) days from the date of Your purchasing any our products accompanying the Program. [. . . ] The following is the example of Digital Photo Navigator on Windows® 98SE. The following is the example of USB Mass Storage Class driver on Windows® 98SE. [Installation Folder] screen appears. Click [Yes]. Then, [Choose Destination Location] screen appears. Click [Finish]. Then, [InstallShield Wizard] screen appears. Click [Next]. Next, [Select Program Folder] screen appears. Click [Next]. When the installation is finished, [InstallShield Wizard Complete] screen appears. Click [Next]. Click [Finish] and then [Setup] screen reappears. --6-- CONTINUED ON NEXT PAGE [Setup Status] screen appears. Wait for a moment until the installation is finished. When the installation is finished, [Digital Photo Navigator Setup] screen appears and asks you if you want to create the icon on the desktop. If you need it, click [Yes]. If not, click [No]. 4 When the message asking whether it is OK to restart the PC appears, click [Yes]. The PC restarts, and after a moment the [Setup] screen from step 1 appears. 5 Repeat steps 3 and 4 to install all of the desired software. Installing [ImageMixer with VCD 1. 1] When the error message below appears while installing ImageMixer, click [OK] to complete installation. NOTES: The Digital Photo Navigator and ImageMixer with VCD instruction manual is included on the CD-ROM in PDF format. Double-click the [JVC] folder and then double-click the [Docs] folder. Open the "Start. pdf" file and click the button of the desired language. 2 Use the USB cable to connect the camcorder to the PC. We recommend that you use the AC Adapter. --9-- CONTINUED ON NEXT PAGE NOTES: When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY (DSC) mode on the camcorder causes malfunctions of the PC. If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the PC, not through the hub. You can also use a DV cable instead of a USB cable to capture video from a tape when using ImageMixer. For more details, refer to the online help. ( "For more detailed information" in the ImageMixer instruction manual on the CD-ROM) Viewing the Contents of a Memory Card (Windows®) 1 Install [USB Mass Storage Class driver]. 5) Windows® Me/2000/XP: There is no need to install this driver. Simply connect the camcorder to the PC with a USB cable, and you can read and write memory cards in the camcorder. 2 Connect the camcorder to the PC with a USB cable. 9) 3 Make sure that there is a memory card in the camcorder. 4 Set the camcorder to the memory card playback mode. Refer to the camcorder's instruction manual for details. [USB MODE] appears on the camcorder's LCD monitor. 5 Double-click the [My Computer] icon on the desktop. The [Removable Disk] icon which represents the memory card in the camcorder appears in the [My Computer] window. NOTE: Windows® 98/98SE: [Removable Disk] icon does not appear if USB Mass Storage Class driver is not installed properly. [. . . ] Do not use an extension USB cable. Software Installation (Macintosh) Follow the procedure described below to install the software. Quit any other software you are using. 1 Load the provided CD-ROM into the PC. 2 Drag the folder [Title converter 1. 0] from the CD-ROM to the hard disk. Do not drag the folder to the System folder. 3 Double-click the [ImageMixer] folder in the CD-ROM. 4 Double-click the [Install ImageMixer with VCD] icon. The installer starts up. [. . . ]