User manual JVC GR-SXM340U-GR-SXM340 Instruction Manual

[. . . ] INSTRUCTIONS ENGLISH LYT0880-001A COMPACT VHS CAMCORDER GR-SXM740 GR-SXM540 GR-SXM340 GR-AXM240 GR-SX970 For Customer Use: Enter below the Model No. which is located on the bottom of the camcorder. Retain this information for future reference. S-VHS is compatible with GR-SXM740/SXM540/ SXM340/SX970 only U Printed in Malaysia 1101MKV UN PJ ** COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. [. . . ] · The S-Video cable connection can improve the dubbed picture quality. An optional S-Video cable is required (GR-SXM740/SXM540/SXM340/ SX970 only). · Be sure to adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on. · If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture. Tape Dubbing 1) Connect the camcorder and the VCR "Connections To A TV/VCR"). Set the Power ( to " ", turn on the VCR's power, Switch and insert the appropriate cassettes in the camcorder and the VCR. Engage the VCR's AUX and Record-Pause modes. to find a spot just before the edit2) Press 4/6 again. Once it is reached, press 4/6 and engage the VCR's Record 3) Press 4/6 mode. 4) Engage the VCR's Record-Pause mode and press 4/6 · Repeat steps 2) through 4) for additional editing, then stop the VCR and camcorder when finished. @ ^ ^ ^ ^. To S-Video Output 5 White to Audio Output 6 7 Yellow to Video Output Connector cover S-Video cable A/V cable TV To TV or VCR White to Audio Input To S-Video Input VCR Yellow to Video Input 15 Using The Cassette Adapter (VHS Playpak) Connection To A Personal Computer (GR-SXM740/SXM540 only) Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a S-VHS/ VHS VCR. 1) Slide the battery cover up to remove it, install one "AA (R6)" size battery, then reattach the cover. 2) Slide the latch to open the compartment door, then insert the cassette and close the compartment door. 3) Load the cassette adapter into the VCR and play the tape back. 4) Slide the latch and the compartment door opens automatically. Do not attempt to force the adapter open. Then, insert your finger in the hole, and push up and remove the cassette. · During tape loading and unloading, do not touch the reels for safety and tape protection. · Tapes recorded in S-VHS or S-VHS ET mode cannot be played back on a regular VHS VCR. Playback is possible with a VCR equipped with the S-VHS or SQPB (S-VHS QUASI PLAYBACK) function (GR-SXM740/SXM540/SXM340/SX970 only). · During special-effect playback (slow motion, still frame, etc. ), the picture may vibrate or noise bars may appear on the screen. · To record on a VCR using a compact cassette and the adapter, cover the adapter's recording safety hole with adhesive tape. Sliding Latch You can transfer image data from the camcorder to a PC using Digital Photo Navigator. When connecting to your PC, refer to the instruction manuals of the PC and Setup Guide for the provided software. When connecting to a Macintosh . The optional KEYSPAN USA-19 USB PDA Adapter is required. [. . . ] Si la lengüeta ha sido extraída, cubra el orificio con cinta adhesiva. · El compartimiento de cassette no puede ser abierto mientras la cámara de video está en el modo de grabación o desconectada de la fuente de alimentación. GRABACIÓN 1) Retire el cubreobjetivo. alimentación Filmación utilizando el visor: Asegúrese que el monitor LCD* esté cerrado y bloqueado. Filmación utilizando el monitor LCD*: Asegúrese que el monitor LCD* esté completamente abierto. [. . . ]