User manual JVC GZ-MC200US

[. . . ] MasterPage: Cover GZ-MC200US. book Page 1 Wednesday, November 24, 2004 8:18 PM ENGLISH GETTING STARTED Basic Edition DIGITAL MEDIA CAMERA 6 19 GZ-MC200 BASIC OPERATIONS (RECORDING & PLAYBACK) MENU SETTINGS 26 32 REFERENCES To deactivate the demonstration, set “DEMO MODE” to “OFF”. 26) INSTRUCTIONS This instruction manual describes the basic operations of the camera. For more information, read the advanced operation manual provided as HTML format in the CD-ROM. See page 32 for details. For Customer Use: Enter below the Model No. [. . . ] ● You can zoom in/out or rotate still images. For details, read the advanced operation manual. 32) BASIC OPERATIONS ● If you press t during the slide show, files are displayed in descending order. ● If you press r during the slide show, files are displayed in ascending order. ● To end the slide show, press 49 again. MasterPage: Body_Left GZ-MC200US. book Page 24 Wednesday, November 24, 2004 8:18 PM 24 EN BASIC OPERATIONS Voice Recording Zoom Lever Voice Playback 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. ● To change the playback speed, see pages 26 and 30. ● To switch the medium to be played back, see pages 26 and 27. . Recording Start/ Stop Button 3 Press 49 to start playback. 4 To pause playback, press 49 again. To adjust the speaker volume During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume. To check the file information Press INFO when playback is paused. To select the file on the index display Slide the zoom lever to W when playback is paused so that the index display appears. Then press rt to select the file and press 49. MODE 2 Power Switch Lock Button 49 3 6 5 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select ● The camera is programmed to record voice on the medium in the CF slot by the factory preset. To switch the recording medium, see pages 26 and 27. ● To change the sound quality and recording level, see pages 26 and 30. Playback Operations High-Speed Search Press 3 or 5 during playback. Locating the start point of the file or skip the file Press 2 or 6 during playback or pause mode. . 3 Press the recording start/stop button to start recording. Deleting Voice Files 4 To stop recording, press the recording start/stop button Press , then press rt to select [EXECUTE] and press again. The camera re-enters the record-standby mode. 49. NOTE: For approximate recording time, see page 43. ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. Deleting Files If you press during recording mode, the file recorded most recently will be deleted. ● However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file. MasterPage: Basic_Right GZ-MC200US. book Page 25 Wednesday, November 24, 2004 8:18 PM BASIC OPERATIONS EN 25 Connecting to a TV or VCR Open the cover. 6 Start playback on the camera. 21) ● Date/Time Set [DATE/TIME] to [AUTO], [ON] or [OFF]. 26, 27) ● Counter Set [SCENE COUNTER] to [ON] or [OFF]. 26, 27) To choose whether or not the following displays appear on the connected TV (Pressing INFO button also turns on/off the displays. ) To AV connector S-Video/Audio/Video Cable (provided) NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack. 14) ● To monitor the picture and sound from the camera without inserting a recording medium, set the camera’s power switch to , then set your TV to the appropriate input mode. [. . . ] In such cases, first disconnect its power supply unit (battery pack, AC adapter, etc. ) and wait a few minutes and then re-connect it and proceed as usual from the beginning. Declaration of Conformity Model Number : GZ-MC200U Trade Name : JVC Responsible party : JVC AMERICAS CORP. 07470 Telephone Number : 973-317–5000 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. [. . . ]