User manual JVC GZMC500AA-GZ-MC500 Instruction Manual

[. . . ] ENGLISH GETTING STARTED 7 20 25 29 31 48 52 DIGITAL MEDIA CAMERA VIDEO RECORDING & PLAYBACK GZ-MC500E/EK STILL IMAGE RECORDING & PLAYBACK VOICE RECORDING & PLAYBACK ADVANCED OPERATIONS MENU SETTINGS REFERENCES To deactivate the demonstration, set "DEMO MODE" to "OFF". 48) INSTRUCTIONS LYT1424-001A EN 2 EN Major Features of this Camera Removable Hard Disk In contrast to conventional digital video cameras that record to DV tapes, the removable hard disk is a new type of card media that enables extended hours of high-resolution, MPEG2 video recording. 6) Enjoying Various Playback Features Unlike tape operation, playback is simple and easy in this camera since no time is needed for rewinding or fast forward operations. Playlist, playback effects, PLAYLIST CONTENTS and other functions are ALL SCENES also available for 01 10. 11 2005 11:30 02 15. 11 2005 23:00 enjoying many different 03 25. 11 2005 11:00 types of playback. Various Recording Media and Modes Video and still images can be recorded to CompactFlash card (CF card) and SD memory card. [. . . ] 46) NOTE: After selecting [DIRECT PRINT] in the menu, connect the USB cable. To print by selecting a still image 1 Set the power switch to . 4 Select [DIRECT PRINT] with the multicontroller (r/t), then press 49. A message [PLEASE CONNECT PRINTER] appears. 1 Set the power switch to . 4 Select [DIRECT PRINT] with the multicontroller (r/t), then press 49. A message [PLEASE CONNECT PRINTER] appears. 5 Connect the camera to the printer with the After a while, the print menu appears. USB cable. 5 Connect the camera to the printer with the USB cable. After a while, the print menu appears. 6 Select [DPOF PRINT] with the multi7 Select [PRINT] with the multi-controller (r/ ADVANCED OPERATIONS t), then press 49. To confirm the DPOF setting, select [CHECK SETTINGS] with the multi-controller (r/t), then press 49. After that, press MENU to return to the previous menu. controller (r/t), then press 49. 6 Select [SELECTED PRINT] with the multicontroller (r/t), then press 49. (w/e), then press 49. 7 Select the desired file with the multi-controller 8 Set the number of prints with the multicontroller (w/e). The number of prints can be set from 1 to 99. 01 OFF NUMBER OF PRINTS DATE PRINT CANCEL NOTE: If the printer is not recognised, or to print again after direct printing with a PictBridge printer, remove the USB cable, select [DIRECT PRINT] in the menu again, and then reconnect the cable. 9 Select [DATE] with the multi-controller (r/t), then select [ON] or [OFF] with the multicontroller (w/e). Select [ON] to print the date or [OFF] not to print. 10 Select [PRINT] with the multi-controller (r/ t), then press 49. The image is printed. 48 EN MENU SETTINGS Changing the Menu Settings You can change the menu settings to customize your camera. Access the desired menu screen by following the steps below, then change the various settings. Common Menus for All Modes [ ] = Factory-preset BASIC SETTING PRESET EXECUTE: Resets all settings to the factorypreset. [CANCEL]: Returns to menu screen without executing reset. [ON]: Activates demonstration mode and shows various features on the display. Demonstration starts in the following cases: When the menu screen is closed after [DEMO MODE] is set to [ON]. With [DEMO MODE] set to [ON], if there is no operation for about 3 minutes after the power switch is set to . Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume. INFO MENU r MODE Lock Button 49 Power Switch w t e 1 Select the operation mode. For Recording Menus: Set the power switch to For Playback Menus: Set the power switch to . (video), (still NOTES: 2 Press MODE to select image) or (voice). 3 Press MENU. 4 Select the desired sub menu and menu item with the multi-controller (r/t) and 49. To return to the normal screen, press MENU. To display the operation guide, press INFO when the menu screen is displayed. (The operation guide is not displayed depending on the type of the menu. ) To remove the operation guide, press INFO again. Even if the menu item is displayed, some item cannot be set depending on the selected mode (video/still image/voice, recording/playback). [. . . ] Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Lorsque ce symbole figure sur un appareil électrique et électronique, cela signifie qu'il ne doit pas être éliminé en tant que déchet ménager à la fin de son cycle de vie. Le produit doit être porté au point de pré-collecte approprié au recyclage des appareils électriques et électroniques pour y subir un traitement, une récupération et un recyclage, conformément à la législation nationale. [. . . ]