User manual JVC HR-J256

[. . . ] VIDEO CASSETTE RECORDER CONTENTS SAFETY FIRST 2 4 4 5 6 8 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . 2 Some Do's And Don'ts . . . . . . . . . . . . . . . 3 HR-J455EK HR-J256EK HR-J255EK HR-J255ES TV TV/VCR AUDIO ­ ­:­ ­ QUICK SET UP GUIDE CHECK THE CONTENTS . . . . . . . . . . . AUTO SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . BASIC OPERATIONS Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] With this video recorder, press NUMBER key "0" and/or TV PROG to select "L-1" for the AV1 IN/ OUT connector, or "L-2" for the AV2 IN connector, depending on the connector being used. 1 ? 3 4 START SOURCE PLAYER Engage its Play mode. START RECORDING DECK Engage its Record mode. NOTES: 3 All necessary cables can be obtained from your dealer. When you use this recorder as the player for editing, be sure to set "O. S. D. " to "OFF" before starting ( pg. 26). TV Receiver Player Your recorder Recorder Your recorder TV Receiver VIDEO CHANNEL or AV mode 21-pin SCART Cable (not provided) RF Cable (provided) Another recorder Recorder Player 21-pin SCART Cable (not provided) RF Cable (provided) VIDEO CHANNEL or AV mode Another recorder 25 Edit From A Camcorder 1 4 7 NUMBER "0" You can use a camcorder as the source player and your video recorder as the recorder. 1 2 MAKE CONNECTIONS Connect the camcorder's AUDIO/VIDEO OUT connectors to the recorder's rear panel AV2 IN or AV1 IN/OUT connector via the optional cable adapter. SET RECORDER'S INPUT MODE Press the NUMBER key "0" and/or TV PROG to select the appropriate input mode depending on the connector being used; "L-1" for the AV1 IN/OUT connector, or "L-2" for the AV2 IN connector. 2 5 8 0 3 2 6 9 4 3 TV PROG START CAMCORDER Engage its Play mode. 1 ? 4 3 START RECORDER Engage its Record mode. Recorder Cable adapter (not provided) VIDEO OUT Camcorder AUDIO OUT Player Audio/Video Cable (not provided) 26 ADVANCED OPERATIONS (cont. ) On-Screen Display You can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF. Other Functions Turn on the TV and select the VIDEO channel (or AV mode). 1 2 ACCESS MAIN MENU SCREEN Press MENU. Place the pointer next to "MODE SET" by pressing %fi, then press OK or . % ACCESS MODE SET SCREEN 1 4 7 2 5 8 0 3 2 6 9 4 3 OK ENABLE/DISABLE ON-SCREEN DISPLAY The default setting is "ON", so if you want onscreen displays, leave the setting as it is and go to step 4. If you don't want the displays to appear, press %fi to place the pointer next to "O. S. D. " and press OK or to set "O. S. D. " to "OFF". AUTO SP=LP TIMER OFF ON ON OFF 1 ? [5] = [MENU] : EXIT 3 MENU 4 RETURN TO NORMAL Press MENU. NOTES: When you use this recorder as the player for editing, be sure to set "O. S. D. " to "OFF" before starting. During playback, the operation mode indicators may sometimes be disturbed depending on the type of tape being used. The superimposed indication on the TV screen tells you what the recorder is doing. 3 1 1­ Operation mode indicators 2­ Preset position number and station name/Aux. indicator (L-1 or L-2) 3­ Cassette loaded mark 4­ Tape speed SP/LP/EP (EP is for NTSC playback only) 5­ Clock display 6­ Current day/month/year 7­ NTSC playback display ( pg. 28) 8­ Counter display 9­ Tape remaining time indicator ( pg. 98 ] SP NTSCPAL 4 7 ­1 : 23 :45 REMAIN 1: 00 8 9 27 Auto SPLP Timer If, when timer-recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording. Recording a programme of 210 minutes in length onto a 180minute tape Approximately 150 minutes SP mode Total 210 minutes Approximately 60 minutes LP mode Auto Timer When the Auto Timer is set to ON the timer is automatically engaged when the recorder power is turned off and automatically disengaged when the recorder is powered back on. Make sure you set "AUTO SPLP TIMER" to "ON" at the Mode Set screen before the timer-recording starts. 1 2 3 4 ACCESS MAIN MENU SCREEN Press MENU. 1 2 3 4 ACCESS MAIN MENU SCREEN Press MENU. ACCESS MODE SET SCREEN Press %fi to place the pointer next to "MODE SET", then press OK or . % MAIN MENU MODE SET AUTO CH SET MANUAL CH SET INITIAL SET ACCESS MODE SET SCREEN Press %fi to place the pointer next to "MODE SET", then press OK or . [5] = [MENU] : EXIT SELECT MODE Press OK or to select either "ON" or "OFF". AUTO SP=LP TIMER OFF ON ON OFF SELECT MODE Press %fi to place the pointer next to "AUTO SPLP TIMER", then press OK or to select "ON". AUTO SP=LP TIMER OFF ON ON ON RETURN TO NORMAL SCREEN Press MENU. % [5] = [MENU] : EXIT [5 ] = [MENU] : EXIT RETURN TO NORMAL SCREEN Press MENU. NOTE: For safety, when Auto timer is set to "OFF", all other recorder functions are disabled while the Timer mode is engaged. To disengage the timer, press . NOTES: The Auto SPLP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes longer than E-180 or with some tapes of shorter lengths. If you have programmed the recorder to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set "AUTO SPLP TIMER" to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming. In order to ensure that the recording fits on the tape, this feature may leave a short non-recorded section at the end of the tape. There may be some picture noise and sound disturbance at the point on the tape where the recorder switches from SP to LP mode. If you perform timer recording with both PDC and the Auto SPLP Timer activated, and the programme goes beyond its originally scheduled length, there may be times when the programme cannot be recorded in its entirety. 28 ADVANCED OPERATIONS (cont. ) Repeat Playback Your video recorder can automatically play back the whole tape 50 times repeatedly. 1 4 7 2 5 8 0 3 2 6 9 4 1 FF START PLAYBACK Press PLAY. 1 ? 2 3 ACTIVATE REPEAT PLAYBACK Press PLAY and hold for over 5 seconds, then release. The Play indicator ( ) on the display panel blinks slowly. The tape plays 50 times automatically, and then stops. PL AY REW PAUSE 3 STOP PLAYBACK Press STOP at any time to stop playback. ST O P NOTE: Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback. NTSC Playback Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes. 1 2 Next Function Memory You can set your recorder's power to go off automatically after the tape is fully rewound. [. . . ] 11 TV +/­Button controls volume of connected TV. "Operating JVC TVs" in the right column. % % How To Use The remote control can operate most of your video recorder's functions, as well as basic functions of JVC TV sets. (See below. ) Point the remote control toward the sensor window. [. . . ]