User manual JVC HR-XV1EU

[. . . ] DVD PLAYER Hi-Fi VIDEO CASSETTE RECORDER USER'S GUIDE For model: HR-XV1EU DIGITAL VIDEO LPT0715-001A Safety Precautions SAFETY FIRST The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial. CAUTION: A DVD/VCR IS A CLASS 1 LASER PRODUCT. [. . . ] The following date are stand for your selection: SUNSAT: all dates from Sunday to Saturday, or MON-SAT: only dates from Monday to Saturday, or MON-FRI: only dates from Monday to Fryday. WKL-MON: each Monday, WKL-TUE: each Tuesday, . . . , WKL-SUN: each Sunday. Change the recording start-time: The recording start-time will be set by SHOWVIEW automatically. However you can change the recording start-time manually. or repeatedly until the If it does not blink, press time blinks. Then press to change. Recording period extension: The recording end-time will be set by SHOWVIEW automatically. However you can extend the recording end-time manually. If it does not blink, press or repeatedly until the time blinks. Then press to extend. Select Tape speed: Select the recording tape speed Standard Play (SP) or Long Play (LP). Press or repeatedly until you are in SPEED-line. Then press or to select "SP" or "LP". 32 Timer-Recording Timer recording can be programmed on the TV-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Preparation: Turn ON the TV and set to the video input mode. Make sure TV/VCR/DVD switch has been slided to VCR/DVD. (The VCR indicator will light) Load a video cassette with the erase prevention tab intact. Make sure with OSD that the time and date are correct. Example: Timer recording for channel 1, 13:00 to 14:30 with Tape speed LP on timer program number 1. or Then press OK. ATS (AUTO TUNING SYSTEM) TIMER REC SET VCR EXTENSION VCR SETUP CHANNEL SETUP SYSTEM SETUP SELECT : ENTER : OK EXIT : MENU stand for 2 Each linememories. one program of the 8 Select one line with OK. Then press ----------------------------------------- --:---:---:---:---:---:---:---:-- --:---:---:---:---:---:---:---:-- --------- - SELECT : / OK EXIT : MENU the desired date with or 3 Setor number keys. Then press to accept it. TIMER REC SET DATE 23 MON START 11:30 --:-END CH 3 TV3 SPEED SP VPS/PDC OFF SELECT : SET : / 09 EXIT : MENU Starting time (13:00), 4 Set the time (14:30), channel (1 ending ARD), Tape speed (LP) and VPS/PDC (P. 35) in the same way as the step 3. In case of an erroneous input press to go back to before step and enter again. Note: In the event of a power failure the data of the automatic recording will be maintained in the built-in memory for about 30 minutes. Also, the clock will continue to run for this period of time. [. . . ] The recording start/end time is not set correctly. The has not been pressed ( is not lit). Tracking adjustment beyond range of automatic tracking circuit. The tape is worn or damaged. 22, 28 15 33 34 24 63 Timer recording does not work. Noise bars on screen. DVD Display is not shown in your language. [. . . ]