User manual JVC HR-XVC16BUS-HR-XVC16 Instruction Manual

[. . . ] DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC16BU HR-XVC17SU INSTRUCTIONS LPT1126-001A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] After 3 minutes in SLOW MOTION mode the DVD+VCR goes back to PLAY mode to protect the tape and video heads. 2. Set the AUDIO OUTPUT option to STEREO so that the left channel sound (L) is heard from the left speaker and the right channel sound (R) is heard from the right speaker. · CM SKIP (Commercial Skip) This feature is useful for skipping commercials or short program segments. The DVD+VCR performs a fast forward picture search through 30 seconds of recording. Press again to extend the search time by an addition 30 seconds. When the search is complete, the DVD+VCR goes into playback mode automatically. The other options are (LEFT) POSITION, which results in the left channel sound (L) being heard from both speakers or (RIGHT) POSITION, which results in the right channel sound (R) being heard from both speakers. Note: MTS (Multi-Channel TV Sound) VHS Hi-Fi Stereo / MTS Br oadcast This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. This DVD+VCR can decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals. It also decodes stereo TV sound from local cable companies as long as they operate on assigned cable frequencies and use the EIA-recommended MTS stereo/bilingual TV sound system. Multichannel TV Sound Indicator (MTS) When you press ENTER / OK one or both of the indicators appears on the TV Screen. STEREO The DVD+VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE option is in the STEREO position. The DVD+VCR can also record mono audio onto the mono audio track. SAP Some stations transmit a Second Audio Program, which is used for a second language or additional information. STEREO/SAP Use the BROADCAST TYPE option to select the desired recording mode (STEREO or SAP). Hi-Fi Stereo Audio Sound A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system. Set the AUDIO MODE option to HI-FI on the VCR SETUP menu. 21 Operation If playing back a HI-FI tape produces noisy audio, manually change the menu setting from HI-FI to NORMAL. VCR Tape Recor ding Basic Instructions 1. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Insert a video cassette with the safety tab intact. Select the desired channel using CH -/+. If you are recording from another source via audio/video input jacks (at the rear or front panel), select LINE1 or LINE2 using AUX, CH + or CH -. Set the desired recording speed (SP or SLP) by pressing SPEED. This DVD+VCR is not designed to record in LP mode. [. . . ] The Progressive Scan is set to On on the setup menu but is connected to a standard(analog) television with component video input. 36 Symptom The DVD+VCR does not start playback. Cause An unplayable disc is inserted. The disc is not placed within the guide. The disc is dirty. Correction Insert a playable disc. (Check the disc type and Regional code. ) Place the disc with the playback side down. [. . . ]