User manual JVC HR-XVC20US-HR-XVC20 Instruction Manual

[. . . ] DVD/CD PLAYER Hi-Fi STEREO VIDEO CASSETTE RECORDER USER'S GUIDE For model: HR-XVC20U For Customer Use: Enter below the Model No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0783-001A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] The "VCR" will go off and recording will continue. Select the TV channel you want to watch by using the TV channel selector. If the connected TV is JVC's, use TV CH +/ after slide TV/ VCR/DVD switch to TV. NOTE: Some CATV hookups do not permit viewing one channel while recording another. See pages 16, 17. To Display VCR operation Status Press OSD. The clock, day of the week and more information will be indicated. While watching TV DAY OF THE WEEK CLOCK STEREO AND SEPARATE AUDIO PROGRAM (SAP) 00 : 00 : 00 SP 8 : 47AM MON STEREO SAP CH 125 CHANNEL TAPE SPEED REAL TIME COUNTER While operating a tape Auto Rewind feature This VCR will automatically rewind the tape when the tape has ended (except during ITR and TIMER REC). It will also eject the tape. HI-FI STEREO 8 : 30AM MON HI - FI OPERATING MODE AUTO REPEAT OUTPUT SELECTION STEREO 00 : 00 : 00 SP TAPE IN To cancel the display: Press OSD until all indicators disappear. 31 Instant Timer Recording (ITR) The Instant Timer Recording feature provides a simple and convenient way to make a timed recording. Preparation: Turn ON the TV and set it to the video input mode. Make sure TV/VCR/DVD switch has been slided to VCR/DVD. (The VCR indicator will light. ) Example: Instant Timer Recording for 30 minutes. 1 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. to 2 Press SP/EPEP. select the desired tape speed SP or The tape counter and "SP" or "EP" will appear on the screen for about 4 seconds. 00 : 00 : 00 SP 3 Set the TV/CATV option to the appropriate position (see page 21). TV - VHF/UHF channels CATV - CABLE TV channels 4 Press Number keys or VCR CH +/ to select the channel to be recorded. CH 110 Press REC the VCR or while holding REC, press PLAY on 5 the Remote on begin recording. Press REC on the VCR again to to stop recording after 30 minutes. Each additional press of REC will increase recording time as shown in the chart below, up to a maximum of 6 hours. The ITR and recording time will appear on the screen for about 4 seconds. And, REC will keep blinking in the display. Press Recording time NORMAL REC once 0:30 twice 1:00 3 times 1:30 4 times 2:00 5 times Press Recording time 3:00 6 times 4:00 7 times 5:00 8 times 6:00 9 times 10 times NORMAL REC ITR 0 : 30 CH 125 INDEX NOTE: If you wish to watch the DVD playback during the ITR, press DVD to change to DVD mode and perform the DVD playback (see page 39). To cancel ITR Press STOP or turn off the power. " " will appear on screen for about 4 seconds. 32 Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Preparation: Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Load a cassette tape with the erase prevention tab intact. Press OSD to verify time and date are correct (see page 31). Example: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP). 1 Press SET UP MENU. Select the TIMER REC SET option, then press ENTER. MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP +//ENTER/MENU select one of 2 Press SET + or topress ENTER. [. . . ] Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800) 537-5722. [. . . ]