User manual JVC JILP PC CONNECTION KIT

[. . . ] PC CONNECTION KIT For Windows® ENGLISH JLIP VIDEO CAPTURE/ JLIP VIDEO PRODUCER For Customer Use: INSTRUCTIONS Enter below the Model No. Retain this information for future reference. Serial No. LYT0500-002A EN 2 EN CONTENTS JLIP VIDEO CAPTURE SOFTWARE SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ­ 32 STARTING JLIP VIDEO CAPTURE 6 INITIALIZATION 7 Selecting the connected device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Edit Standby button · The player is put into Pause mode for the Syncro Edit pre-roll time already set on the Options dialog box (see page 52). · This button is used when VCRs not compatible with this editing system and performing manual editing. · This button cannot be clicked when the counter reads less than 00:00:30:00. · This button cannot be clicked when the player is not paused. Syncro Edit button · After going into Playback-Pause mode at the In point of the recorder and player, clicking this button rewinds both decks by the pre-roll amount and executes the first event. · Since no Out point is specified, the Syncro Edit is stopped using Stop. · This button cannot be clicked when the counter reads less than 00:00:30:00. · This button cannot be clicked when the player is not paused. Select Player/Recorder button · Selects the deck to be operated. The player is forcibly selected when no recorder is connected to the JLIP. · This button cannot be clicked when there is no JLIP recording equipment. 5 Program list · Displays the following setting information beginning from the left: Scene number, In point, P. AE/Effect, Out point, Fade/Wipe Effect, Duration Time Counter, and Memo. · Up to 99 programs can be set per file for scenes specified by an In and Out point. 6 ID number · Displays the video source unit's ID number. · An ID number can be clicked to display the JLIP Devices dialog box as well as when switching the serial port or performing JLIP devices scanning. 7 Edit Indicator · In Normal mode, the deck being operated is displayed in green. · In Edit mode, both deck indicators light (Player: Green, Recorder: Red) and an arrow also lights. · The recorder lights red between the In point and Out point while the recorder is actually recording. · Clicking on either deck selects the one to be operated. 38 EN JLIP VIDEO PRODUCER WINDOW BUTTONS AND DISPLAYS !Jog/Shuttle @ Tape Operation buttons Jog/Shuttle Operation buttons Click these buttons to perform Jog/Shuttle operations. (cont. ) Jog Dial Select button Jog Dial mode is selected when the inner ring is lit. Shuttle Dial Select button Shuttle Dial mode is selected when the outer ring is lit. Jog Dial Lamp (Inner lamp)/Jog Dial · Jog Dial mode is selected when the jog dial lamp is lit by clicking with the mouse. · It is possible to advance frames by clicking with the mouse on the left (reverse) or right (forward) arrows. · The deck can be operated at this time using the number keys. Shuttle Lamp (Outer ring)/Shuttle Ring · Shuttle mode is selected when the shuttle dial lamp is lit by clicking with the mouse. [. . . ] 36, 37, 44, 45 Field (Image Correction) . . . . . . . . . . . . . . . . 17, 20, 21 First Image button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Forward Frame Advance button . . . . . . . . . . . . . . 8, 9 Full Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]