User manual JVC KDAR370J-KD-AR370 Instruction Manual

[. . . ] For customer Use: Enter below the Model No. Which are located on the top or bottom of the cabinet. Retain this information for future reference. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Finalize the CD-R/CD-RW with the component which you used for recording. Stop playback while driving on rough roads. Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. A longer readout time is required ("CHECK" keeps flashing on the display). Tracks do not play back in the order you have intended them to play. Correct characters are not displayed (e. Do not use too many hierarchies and folders. Playback order is determined when the files are recorded. This is caused by how the tracks are recorded on the disc. insert a disc that contains MP3/WMA tracks. This unit can only display letters (upper case), numbers, and a limited number of symbols. Deactivate the equalizer either on the unit or the iPod/D. The headphones are disconnected during playback. Disconnect the adapter from both the unit and iPod/D. Check the connection between the adapter and this unit. Player does not turn on or does not work. No sound can be heard when connecting an iPod nano. Player's controls do not work after disconnecting from this unit. Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 , 40 Hz to 20 000 Hz at no more than 0. Rear: 19 W per channel into 4 , 40 Hz to 20 000 Hz at no more than 0. Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: MPEG1/2 Audio Layer 3 Max. 4 kg (excluding accessories) Design and specifications are subject to change without notice. [. . . ] If you are not sure how to install this unit correctly, have it installed by a qualified technician. *1 When you stand the unit, be Before removing the unit, release the rear section. Insert the two handles, then pull them as illustrated so that the unit can be removed. When using the optional stay / When installing the unit without using the sleeve / In a Toyota car for example, first remove the car radio and install the unit in its place. [. . . ]