User manual JVC KD-DB52

[. . . ] ENGLISH FRANÇAIS DEUTSCH KD-DB52/KD-DB42 CD RECEIVER / RÉCEPTEUR CD / CD-RECEIVER Only for KD-DB52 / Uniquement pour le KD-DB52 / Nur bei KD-DB52: For canceling the display demonstration, see page 4. For installation and connections, refer to the separate manual. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. [. . . ] DAY [25] /NIGHT [11]: Selects the display and button illumination brightness level 00-31 for day and night. [ON]: Shows the TAG information while playing MP3/WMA/AAC tracks. Takes effect only when clock data is received. The illumination control lead connection is required. (See “Installation/Connection Manual”. ) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to other than <DIMMER AUTO>. Some characters or symbols will not be shown correctly (or will be blanked) on the display. ON: Boosts low and high frequencies to produce a well-balanced sound at a low volume level. -05 - +05 [00]: Presets the volume adjustment level of each source, compared to the FM volume level. Before adjustment, select the source you want to adjust. (“VOL ADJ FIX” appears if “FM” is selected. ) Select if the REAR/SW terminals are used for connecting the following devices (through an external amplifier). W: Subwoofer [REAR]: Speakers LOW 55Hz / [LOW 85Hz] / LOW 120Hz: Audio signals with frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. Low frequency signals are cut off from the front/rear speakers. (All signals are sent to the front/rear speakers. ) [ON]/OFF: Activates or deactivates the keypress tone. ON: Attenuates the sounds while using the cell phone (not connected through KS-BTA100). LOW POWER: VOLUME 00-VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. ) [HIGH POWER]: VOLUME 00-VOLUME 50 If you are using a two-speaker system, set the fader level to “00”. This adjustment will not affect the subwoofer output. This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>. [. . . ] 0 “CANNOT PLAY” flashes or “NO 0 Check whether the connected USB device is compatible with USB” appears on the display. 0 The unit cannot detect the USB 0 Reattach the USB device again. While playing a track, sound is The tracks have not been properly copied into the USB device. Copy tracks again into the USB device, and try again. [. . . ]