User manual JVC KD-G502B

[. . . ] CD RECEIVER KD-G502 This unit is equipped with the display demonstration. To cancel it, see page 6. INSTRUCTIONS GET0193-011A [B] IMPORTANT FOR LASER PRODUCTS 1. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. [. . . ] · To select a folder number from 07 ­ 12: Press and hold 1 (7) ­ 6 (12) for more than one second. File 6 (Three times) \ 10 \ 20 \ 30 (Twice) \ 31 \ 32 Notes: · If indicator flashes on the display after you have selected a folder, it means that the folder does not contain any MP3 files. · You cannot directly select a folder with a number greater than 12. To select a particular file in a folder, press ¢ or 4 after selecting the folder. · Ex. 2 : To select file number 8 while playing file number 36 File 36 (Three times) \ 30 \ 20 \ 10 (Twice) \9\8 CONTINUED ON THE NEXT PAGE 25 To skip to the next or previous folder Press 5 (up) while playing an MP3 disc to skip to the next folder. Each time you press the button consecutively, the next folder is located (and the first file in the folder starts playing, if recorded). Press (down) while playing an MP3 disc to skip back to the previous folder. Each time you press the button consecutively, the previous folder is located (and the first file in the folder starts playing, if recorded). Mode Active indicator Plays at random All files of the current folder, then files of the next folder and so on. All files on the disc. FLDR RND RND and indicators light up. DISC RND RND and indicators light up. Note: If the folder does not contain any MP3 files, it is skipped. To play back files repeatedly (Track Repeat/Folder Repeat Play) You can play back the current file or all the files in the current folder repeatedly. 1 Press MODE to enter the Selecting MP3 playback modes To play back files at random (Folder Random/Disc Random Play) You can play back all files of the current folder or all files on the MP3 disc at random. functions mode while playing an MP3 disc. 2 Press RPT (repeat), while "MODE" is still flashing on the display, so that "TRK RPT" or "FLDR RPT" appears on the display. Each time you press the button, the repeat play mode changes as follows: 1 Press MODE to enter the functions mode while playing an MP3 disc. TRK RPT 2 Press RND (random), while "MODE" is still flashing on the display, so that "FLDR RND" or "DISC RND" appears on the display. Each time you press the button, the random play mode changes as follows: FLDR RPT Canceled RPT indicator Ex. : When you select "TRK RPT" Active indicator FLDR RND DISC RND Canceled Mode TRK RPT FLDR RPT Plays repeatedly RPT indicator The current (or lights up. All files of the current (or specified) folder. RND and (folder) indicators Ex. : When you select "FLDR RND" 26 SOUND ADJUSTMENTS Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode (C-EQ: custom equalizer) suitable to the music genre. · There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. Ex. : When you select "ROCK" Indication USER ROCK CLASSIC For: (Flat sound) Rock or disco music Classical music Light music Funk or rap music Jazz music Preset values BAS TRE 00 +01 ­02 +01 00 +03 LOUD OFF ON OFF OFF ON OFF 00 +03 +01 +04 +02 +02 Indication pattern changes for each sound mode except for "USER. " 1 Press MODE to enter the functions mode. 2 POPS Press EQ (equalizer) while "MODE" is still flashing on the display. You can confirm the current sound mode. HIP HOP JAZZ 3 Select the sound mode you want. Each time you press the button, the sound modes change as follows: Note: You can adjust each sound mode to your preference. Once you make an adjustment, it is automatically stored for the currently selected sound mode. See "Adjusting the sound" on page 28. USER JAZZ ROCK HIP HOP CLASSIC POPS USER ROCK JAZZ CLASSIC HIP HOP POPS 27 Adjusting the sound You can adjust the sound characteristics to your preference. *1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER. " *2 If you are using a two-speaker system, set the fader level to "00. " *3 Normally the control dial works as the volume control. So you do not have to select "VOL" to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 32 for details. ) 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: BAS (bass) TRE (treble) (fader) FAD 2 Adjust the setting. To increase the level or turn on the loudness To decrease the level or turn off the loudness Indication pattern changes as you adjust the bass or treble. VOL (volume) LOUD (loudness) BAL (balance) Indication BAS*1 To do: Adjust the bass. Range ­06 (min. ) | +06 (max. ) ­06 (min. ) | +06 (max. ) R06 (Rear only) | F06 (Front only) TRE*1 Adjust the treble. FAD*2 Adjust the front and rear speaker balance. Ex. 1: When you adjust "TRE" (treble) BAL Adjust the left L06 (Left only) and right speaker | balance. R06 (Right only) Boost low and high frequencies LOUD ON to produce a well| balanced sound LOUD OFF at low volume level. 2: When you turn on the loudness LOUD*1 3 Repeat steps 1 and 2 to adjust the other items. VOL*3 To reset each sound mode to the factory settings, repeat the same procedure and reassign the preset values listed in the table on page 27. 28 OTHER MAIN FUNCTIONS Changing the general settings (PSM) You can change the items listed in the table below and on page 30 by using the PSM (Preferred Setting Mode) control. 3 Adjust the PSM item selected. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. [. . . ] ­ The pickup lens inside the unit is dirty. · CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. · CD-Rs or CD-RWs are susceptible to high temperatures or high humidity, so do not leave them inside your car. · Do not use following CD-Rs or CD-RWs: ­ Discs with stickers, labels, or protective seal stuck to the surface. [. . . ]