User manual JVC KD-HDR30

[. . . ] sikkerhedsafbrydere er ude AVOID DIRECT EXPOSURE af funktion. (e) telse for stråling. VARNING: Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. (s) VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. (f) Name/Rating plate IMPORTANT FOR LASER PRODUCTS Precautions: 1. [. . . ] (CD play will not start this time. ) Current track Elapsed playing time 17 ENGLISH Playing a CD Text In a CD Text, some information about the disc (its disc title, performer and track title) is recorded. You can show these disc information on the display. To go to the next track or the previous tracks Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next track is located and played back. 4 briefly, while Press playing a CD, to go back to the beginning of the current track. Each time you press the button consecutively, the beginning of the previous tracks is located and played back. 1 Select text display mode while playing a CD Text. Each time you press the button, the display changes as follows: Disc Title / Performer Track Title Current track no. and Elapsed playing time Notes: · The display shows up to 10 characters at one time and scrolls if there are more than 10 characters. See also "To select the scroll mode ­ SCROLL" on page 25. · When you press D (display) while playing a conventional CD, "NO NAME" appears for the disc title/performer and the track title. To go to a particular track directly Press the number button corresponding to the track number to start its playback. Locating a track or particular portion on a CD To fast-forward or reverse the track Press and hold ¢ , while playing a CD, to fast-forward the track. Press and hold 4, while playing a CD, to reverse the track. · To select a track number from 1 ­ 6: Press 1 (7) ­ 6 (12) briefly. · To select a track number from 7 ­ 12: Press and hold 1 (7) ­ 6 (12) for more than 1 second. Track number Elapsed playing time 18 To play back tracks at random (Random Play) 1 Press M/B (mode/band) to enter the functions mode while playing a CD. 2 Press RND (random), while still in the functions mode, so that the RND indicator lights up on the display. 2 Press ¢ or 4 to select "EQ LINK" (Equalization Link). 3 Turn the control dial clockwise to select "LINK ON. " 4 Press SEL (select) to finish the setting. To cancel EQ Link, repeat the same procedure and select "LINK OFF" by turning the control dial counterclockwise in step 3. · When "EQ LINK" is set to "LINK ON" The selected sound mode can be stored in memory for the current source. Each time you change the same source, the same sound mode is also recalled, and shown after the source name. · When "EQ LINK" is set to "LINK OFF" The selected sound mode effect applies to all the sources selected. FLAT O Hard Rock O R & B*O POP O JAZZ O DanceMusic O Country O Reggae O Classic O USER 1 O USER 2 O USER 3 O (back to the beginning) * Rhythm and Blues EQ level changes as you select the sound mode. Ex. : When you select "POP" To cancel the sound mode, select "FLAT" in step 2. 21 ENGLISH Selecting preset sound modes Notes: · You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see "Storing your own sound adjustments" on page 22. · To adjust the bass reinforcement level temporarily, see page 20. ENGLISH Storing your own sound adjustments You can adjust the sound modes to your preference and store your own adjustments in memory. (USER 1, USER 2 and USER 3) · There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 4 5 Repeat step 2 and 3 to adjust the other sound elements. Select one of the user sound modes (USER1, USER2, USER3). 1 Press EQ. The last selected sound mode is recalled, and it is applied to the current source. Ex. : When you have selected "POP" previously Ex. : When you select "USER 2" 2 Press SEL (select) to select sound elements to adjust. Each time you press the button, the sound elements to adjust change as follows: LOW FREQ. * = LOW WIDTH = LOW LEVEL = MID FREQ. * = MID WIDTH = MID LEVEL = HIGH FREQ. * = HIGH LEVEL = (back to the beginning) FREQ. [. . . ] We recommend that you stop CD play while driving on such rough roads. 39 ENGLISH TROUBLESHOOTING ENGLISH What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms · CD cannot be played back. · CD sound is sometimes interrupted. [. . . ]