User manual JVC KD-R511

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] ⷠBefore making an adjustment, select the source you want to adjust. *6 If you are using a two-speaker system, set the fader level to "00. : Frequencies lower than 72 Hz are sent to the subwoofer. : Frequencies lower than 111 Hz are sent to the subwoofer. : Frequencies lower than 157 Hz are sent to the subwoofer. : Select either one which mutes the sounds while using a mobile phone. : VOLUME 00 ­ VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. *9 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level set higher than "VOLUME 30. " *10 Displayed only when any source other than "AM" is selected. *11 Displayed only when any source other than "AUX IN" is selected. You can select your preferred color for buttons illumination (except for EQ/BASS-TRE / DISP ) and display color separately. Pressing COLOR in step 1 will enter zone selection menu (BUTTON ZONE / DISP ZONE / ALL ZONE) directly. Repeat steps 2 and 3 to select a different zone and your preferred color. ⷠIf <ALL ZONE> is selected in step 2, the buttons and display illumination changed to the current/selected <BUTTON ZONE> color. You can also change the <ALL ZONE> color to one of your preferred color by performing step 3. ] Select your preferred color from one of the 29 preset colors or <USER> color. Creating your own day and night colors--USER You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone and display zone. Press T/P BACK after step 5, then select DISP ZONE in step 2. Press T/P BACK after step 5, then select NIGHT COLOR in step 2. Pressing COLOR in step 1 will enter zone selection menu (BUTTON ZONE / DISP ZONE) directly. If "00" is selected for all the primary colors (as in step 4) for <DISP ZONE>, nothing appear on the display. How to clean the connectors frequent detachment will deteriorate the connectors. [. . . ] By how the tracks are recorded on the disc. "NOT SUPPORT" appears on the Skip to the next track encoded in an appropriate format display and track skips. or to the next non-copy-protected WMA track. The correct characters are not displayed (e. [. . . ]