User manual JVC KD-R811

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] " The current sound mode changes to "USER" automatically. : Display demonstration will be activated automatically if no operation is done for about 20 seconds. ( 4) : Adjust the hour, then the minute. : Changes the display and buttons (except for EQ/BASS-TRE / DISP) illumination during menu, list search and playback mode operations. The display will change to the original color when the call is answered or the incoming call stops. When the unit receives a text message, the display only illuminate in blue. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. : Preset the volume adjustment level of each source (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. Before making an adjustment, select the source you want to adjust. LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies higher than 55 Hz/85 Hz/120 Hz are cut off. 62Hz/95Hz/ : Frequencies lower than 62 Hz/95 Hz/135 Hz are 135Hz cut off. Off : All signals are sent to the front/rear speakers. *3 If you are using a two-speaker system, set the fader level to <0>. Low Power : Vol 00 ­ Vol 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. Off : Dims the display when you turn on the headlights. Pressing DISP for more than one second can scroll the display regardless of the setting. Off : Shows the Tag information while playing MP3/ WMA/WAV tracks. : Positive pattern will be selected during the day time *8, while negative pattern will be used during the night time *8. : Adjust the display contrast to make the display indications clear and legible. *5 The volume level automatically changes to "Vol 30" if you change to <Low Power> with the volume level set higher than "Vol 30. Off PTYStandby *10, *11 Tuner TA Volume *11 Traffic announcement volume P-Search *11 Programme search IF Band Intermediate frequency band · : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received). [. . . ] Reset the unit ( 3), then search from the Bluetooth device again. While playing a track, sound is sometimes interrupted. Correct characters are not displayed (e. The unit does not detect the Bluetooth device. [. . . ]