User manual JVC KD-S600

[. . . ] CD RECEIVER KD-S600/S550 RECEPTOR CON CD KD-S600/S550 RECEPTEUR CD KD-S600 ATT BAND PROG KD-S600/S550 DISC FUNC DISC PRESET KD-S550 COMPACT For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l'installation et les raccordements, se référer au manuel séparé. DIGITAL AUDIO For customer Use: Enter below the Model No. which are located on the top or bottom of the cabinet. [. . . ] 7 ENGLISH Manual preset ENGLISH Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. 1 2 1 FM AM Select the band (FM1, FM2, FM3 or AM) you want. FM1 FM2 FM3 AM 2 Select the number (1 ­ 6) for the preset station you want. 8 SEL MO/RND +/­ ¢ 4 RPT/SCAN Scanning broadcast stations When you press RPT/SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you hear becomes monaural but reception will be improved. A Lights up when receiving an FM broadcast in stereo. To restore the stereo effect, press the same button again. Changing the AM/FM channel intervals When using this unit in an area other than North or South America: When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and 200 kHz for FM. You can change the channel intervals by following the procedure below. 1 Press SEL (select) for more than 2 seconds. "CLOCK H", "CLOCK M", "SCM LINK", "LEVEL" or "AREA" appears on the display. 2 If "AREA" does not appear, press 3 Press +. "AREA EU" appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM. To reset to the factory setting, follow the above step 1 and 2, then press -- in step 3 ("AREA US" appears on the display). AREA EU: Select this when used in an area other than North and South America. AREA US: Select this when used in North or South America. 9 ENGLISH Other convenient tuner functions CD OPERATIONS ENGLISH Playing a CD 0 1 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. · When a CD is inserted upside down, "EJECT" appears on the display and the CD automatically ejects. A A Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically. CAUTION on Volume Setting CDs produces very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a CD and adjust it as required during playback. To stop play and eject the CD Press 0. When the repeat mode is turned on, the RPT indicator lights up on the display. Track number of the currently playing track Other convenient CD functions Prohibiting CD ejection You can prohibit the CD ejection and can "lock" a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. "EJECT" flashes on the display for about 5 seconds, and the CD is "locked. " To cancel the prohibition and "unlock" the CD, press and hold CD and 0 for more than 2 seconds again. [. . . ] ­ The pickup lens inside the CD player is dirty. · Use only "finalized" CD-Rs. · CD-RWs (Rewritable) cannot be played back on this recevier. About mistracking: Mistracking may result from driving on extremely rough roads. This does not damage the unit and the CD, but will be annoying. [. . . ]