User manual JVC KD-SHX701

[. . . ] This unit is equipped with the display demonstration. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. [. . . ] for MP3 tracks only: There are two versions­ ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). When both ID3v1 and ID3v2 are recorded, ID3v2 will be shown. To set the Traffic Announcement volume--TA Volume You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level. To adjust the display brightness --Bright You can adjust the brightness to make the display clear and legible. To change the FM tuner selectivity --IF Filter In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard. Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost. To turn on/off the key-touch tone--Beep You can deactivate the key-touch tone if you do not want it to beep each time you press a button. To select the telephone muting --Telephone This mode is used when a cellular phone system is connected. Depending on the phone system used, select either "Muting1" or "Muting2, " whichever mutes the sounds from this unit. During telephone muting, disc play pauses. Muting1: Selects this if this setting can mute the sounds while using the cellular phone. Muting2: Selects this if this setting can mute the sounds while using the cellular phone. To select the amplifier gain control-- Amp Gain You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select "Low Power" to prevent them from being damaged. HighPower: You can adjust the volume level from "0" to "50. " · Low Power:You can adjust the volume level from "0" to "30. (Sounds come out only from external amplifiers connected to LINE OUT/ SUBWOOFER OUT plugs. You can use the following table to keep memo of your own PSM settings. You can assign titles to 40 CDs (both in this unit and in the CD changer), and the external component. [. . . ] "No Files" appears for a while, then the disc ejects. ] The current MP3/WMA disc does not contain any MP3/WMA tracks. Correct characters are not displayed (ex. ] This unit can only display a limited number of special characters (see the tables on page 62). [. . . ]