User manual JVC KDSHX750J-KD-SHX750 Instruction Manual

[. . . ] CD/SD RECEIVER KD-AR7500/KD-SHX750 RECEPTOR CON CD/SD KD-AR7500/KD-SHX750 RECEPTEUR CD/SD KD-AR7500/KD-SHX750 SOURCE KD-AR7500 DISP BACK BAND PICT MENU SOURCE KD-SHX750 DISP BACK BAND PICT MENU For canceling the display demonstration, see page 9. Para cancelar la demostración en pantalla, consulte la página 9. Pour annuler la démonstration des affichages, référez-vous à la page 9. For installation and connections, refer to the separate manual. [. . . ] Should this occur, the CD player may malfunction. In this case, eject the disc and leave the receiver turned on for a few hours until the moisture evaporates. New discs may have some rough spots around the inner and outer edges. If such a disc is used, this receiver may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. How to handle SD card SD cards are precision products. DO NOT impact, bend, drop, or wet them. Available character In addition to the Roman alphabets (A ­ Z, a ­ z), the following characters will be used. · You can also use the following characters to assign titles (see page 36). Accented letters: upper case How to handle discs When removing a disc from Center holder its case, press down the center holder of the case and lift the disc out, holding it by the edges. · Always hold the disc by the edges. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up). · Make sure to store discs into the cases after use. Accented letters: lower case Numbers and symbols Do not use the following discs: Warped disc Sticker Sticker residue Disc Stick-on label 44 More about this receiver Turning on the power · By pressing SOURCE on the receiver, you can also turn on the power. · This receiver has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA), MP3 and WMA format and MP3/WMA files recorded in an SD card. · When a disc or an SD card has been loaded, selecting "CD" or "SD" for the playback source starts playback. Turning off the power · If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Inserting a disc · When a disc is inserted upside down, the control panel moves down, and the disc automatically ejects from the loading slot. · If you keep the control panel open for about 1 minute, (beeps sound when the "Beep" setting is turned "On"--see page 34) the control panel returns to its previous position. Selecting the source · When no disc or SD card is loaded in the receiver, "CD" or "SD" cannot be selected. · Without connecting to the SIRIUS radio or CD changer, "SIRIUS" or "CD-CH" cannot be selected. · To select the "EXT-IN" for the playback source, set the "Ext Input" setting correctly (see page 34). Playing a disc/SD card · While playing an audio CD: If a title has been assigned to the audio CD (see page 36), it will be shown on the display. · While fast-forwarding or reversing an MP3 or WMA track, you can only hear intermittent sounds. · While playing an SD card, the playback order may differ from the one played back using other SD players. · This receiver may be unable to play back some SD card due to their characteristics or recording conditions. · This receiver cannot play back mini SD card and MMC. · If the inserted SD card does not have the correct files, you cannot select "SD" for the playback source. Tuner operations Storing stations in memory · During SSM search. . . ­ All previously stored stations are erased and stations are stored newly. ­ Received stations are preset in No. ­ When SSM is over, the station stored in No. [. . . ] ­ You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat built-up inside the receiver (see page 34 of the INSTRUCTIONS). ­ The line output level of this receiver is kept high to maintain the hi-fi sounds reproduced from this receiver. When connecting an external amplifier to this receiver, turn down the gain control on the external amplifier to obtain the best performance from this receiver. Remote lead Cable remoto Fil d'alimentation à distance Y-connector (not supplied for this receiver) Conector en Y (no suministrado con esta unidad) Connecteur Y (non fourni avec cet appareil) To the remote lead of other equipment Al conductor remoto de otro equipo Au fil de télécommande de l'autre appareil Remote lead (Blue with white stripe) Cable remoto (Azul con rayas blancas) Fil d'alimentation à distance (Bleu avec bande blanche) Rear speakers Altavoces posteriores Enceintes arrière JVC Amplifier Amplificador de JVC JVC Amplificateur Front speakers Altavoces delanteros Enceintes avant JVC Amplifier Amplificador de JVC JVC Amplificateur Subwoofer Subwoofer Caisson de grave *3 Firmly attach the ground wire to the *3 Front speakers Altavoces delanteros Enceintes avant JVC Amplifier Amplificador de JVC JVC Amplificateur *3 *4 Signal cord (not supplied for this receiver) *4 Cable de señal (no suministrado con esta unidad) *4 Cordon de signal (non fourni avec cet appareil) metallic body or to the chassis of the car--to the place not coated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the receiver. [. . . ]