User manual JVC KD-X50BT

[. . . ] ENGLISH FRANÇAIS KD-X50BT DIGITAL MEDIA RECEIVER / RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE For canceling the display demonstration, see page 3. / Pour annuler la démonstration des affichages , référez-vous à la page 3. For installation and connections, refer to the separate manual. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. [. . . ] Default ring tone is different according to the paired device. IN PHONE: The unit uses the connected phones’ ring tone to alert you when a call/text message comes in. (The connected phone will ring if it does not support this feature. ) COLOR 01 — 29 [06]: Select your preferred color for incoming call/text message alerts. [ON]: Turns on the Noise Reduction and Echo Cancellation of the connected microphone for clearer sound. (01— 03) [02]: The sensitivity of the microphone increases as the MIC level is increased. [ON]: The unit rings and “RCV MESSAGE” “[Device Name]” appears to alert you of an incoming text message. OFF: The unit does not alert you of an incoming text message. AUTO ANSWER RING TONE RING COLOR NR/EC MODE MIC LEVEL MSG NOTICE * Selectable only when the connected phone supports PBAP. 16 | ENGLISH KD-X50BT_E_EN 2011/12/1 20:28:2 Bluetooth audio player Playing a Bluetooth audio player A Bluetooth audio player Select <BT REAR> or <BT FRONT> depending on the location of the USB Bluetooth adapter KS-UBT1. Operate the Bluetooth audio player to start playback. Operations and display indications may differ according to their availability on the connected device. basic operations Starts or resumes playback. Selecting the playback modes For Bluetooth devices that support AVRCP 1. Randomly plays all tracks of the current group. eNGLISH | 17 KD-X50BT_E_EN 2011/12/1 20:28:2 Illumination color adjustments All zone All zone: Includes both Button zone and Display zone. Button zone Display zone Selecting the preset color You can select a preset color for <BUTTON ZONE>, <DISP ZONE>, and <ALL ZONE> separately. Storing your own adjustments You can store your own day and night colors for <BUTTON ZONE> and <DISP ZONE> separately. 3 3 Select a primary color <RED/GREEN/ BLUE>, and then adjust the level <00-31>. Repeat this procedure until you have adjusted all the three primary colors. your adjustment is automatically stored to “USER”. If “00” is selected for all the primary colors for <DISP ZONE>, nothing appears on the display. [. . . ] (Refer to the instructions of your audio player. ) Disconnect and connect the Bluetooth player again. Use “VOICE” calling method in a more quiet environment. Reduce the distance from the microphone when you speak the name. [. . . ]