User manual JVC KW-NT1

[. . . ] English: Hereby, JVC, declares that this KW-NT1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] This setting is valid only to the external monitor connected. Select the monitor type to watch a wide screen picture on the external monitor. When you select <16:9> for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. Even if <4:3PS> is selected, the screen size may become <4:3LB> for some discs. You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. auto : Select to apply the effect to multi-channel encoded software. On : Select to always use this function. select the signal format emitted through the DIGITAL OUT (optical) terminal. ( also page 71) Stream : Select this when connecting an amplifier or a decoder compatible with Dolby Digital or MPEG Audio. Dolby D : Select this when connecting an amplifier or a decoder compatible with Dolby Digital. PCM : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital or MPEG Audio, or when connecting to a recording device. This unit has its own Registration Code. Once you have played back a file with which the Registration Code recorded, this unit's Registration Code is overwritten for copyright protection. This unit can play the MP3/WMA files stored in SD card/USB mass storage class device. All tracks in the SD card/USB device will be played repeatedly until you change the source. You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. Push in the SD card until you hear a clicking sound. Avoid using the USB device if it might hinder your safety driving. Do not start the car engine if a USB device is connected. Do not pull out and attach the USB device repeatedly while "File Check" is shown on the screen. Disconnect a USB device while playback is paused or another source is selected. In this case, disconnect the USB device then reset this unit and the USB device. [. . . ] This unit can be connected with one Bluetooth mobile phone at a time. While connected to a device, this unit cannot be detected from another device. Reduce the distance between the unit and the Bluetooth mobile phone. Move the car to place where you can get a better signal reception. [. . . ]