User manual JVC KW-S601

[. . . ] CD RECEIVER KW-S601 INSTRUCTIONS GET0397-001A [B] Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer. · Refer also to the Instructions supplied for your DAB tuner. ~ For selecting the external component connected to AUX input jack. Y ! Turn on the connected component and start playing the source. Adjust the volume. ~ / Adjust the sound as you want. (See page 12. ) Y Start searching for an ensemble. When an ensemble is received, searching stops. To stop searching, press the same button again. Continued on the next page 17 ! Select a service (either primary or secondary) to listen to. Tuning in to a preset DAB service 1 To tune in to an ensemble manually Start searching for an ensemble, as in step Y . . . 1 2 Select the preset DAB service (primary) number (1 ­ 6) you want. 2 Select a desired ensemble frequency. If the selected primary service has some secondary services, pressing the same button again will tune in to the secondary services. Storing DAB services in memory You can preset six DAB services (primary) for each band. Tracing the same programme-- Alternative Frequency Reception You can keep listening to the same programme by activating the Alternative Frequency Reception. · While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme. · While receiving an FM RDS station: When driving in an area where a DAB service is broadcasting the same programme as the FM RDS station is broadcasting, this unit automatically tunes in to the DAB service. 1 2 Select a service you want (see above). Select the preset number (1 ­ 6) you want to store into. Preset number flashes for a while. 18 When shipped from the factory, Alternative Frequency Reception is activated. To deactivate the Alternative Frequency Reception, see page 14. FM RDS operations · Network-Tracking Reception requires two types of RDS signals--PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, NetworkTracking Reception will not operate correctly. · If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOL) if the current level is lower than the preset level. · When Alternative Frequency Reception is activated (with AF selected), NetworkTracking Reception is also activated automatically. On the other hand, NetworkTracking Reception cannot be deactivated without deactivating Alternative Frequency Reception. (See page 13. ) · If you want to know more about RDS, visit «http://www. rds. org. uk». To change the display information while tuning to an ensemble Service name = Ensemble name = Channel number = Frequency = Clock = (back to the beginning) More about this unit Basic operations Turning on the power · By pressing the source buttons on the unit, you can also turn on the power. If the source is ready, playback also starts. Disc operations Caution for DualDisc playback · The Non-DVD side of a "DualDisc" does not comply with the "Compact Disc Digital Audio" standard. Therefore, the use of NonDVD side of a DualDisc on this product may not be recommended. Turning off the power · If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory · During SSM search. . . ­ All previously stored stations are erased and stations are stored newly. ­ Received stations are preset in No. ­ When SSM is over, the station stored in No. · When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number. General · This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA), MP3, and WMA formats. Inserting a disc · When a disc is inserted upside down, the disc automatically ejects and the unit starts playing the last selected source. · Do not insert 8 cm discs (single CD) and unusual shape discs (heart, flower, etc. ) into the loading slot. Continued on the next page 19 Playing a disc · While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds. Playing an MP3/WMA disc · This unit can play back MP3/WMA files with the extension code <. mp3> or <. wma> (regardless of the letter case--upper/lower). [. . . ] Check the connecting cable and its connection. The headphones are disconnected during playback. Restart the playback operation using the control panel (see page 15). Disconnect the headphones from the iPod nano. [. . . ]