User manual JVC KW-XR411

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] ( 4) : Adjust the hour, then the minute. Pressing DISP for more than one second can scroll the display regardless of the setting. Takes effect only when CT (clock time) data is received. : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received). ) : When the currently received signals become weak, the unit switches to another station broadcasting the same programme. ) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. VOL ADJ ­05 -- : Preset the volume adjustment level of VOL ADJ +05 each source (except FM), compared to the [ VOL ADJ 00 ] FM volume level. The volume level will automatically increase or decrease when you change the source. ⷠBefore making an adjustment, select the source you want to adjust. : Frequencies lower than 72 Hz are sent to the subwoofer. : Frequencies lower than 111 Hz are sent to the subwoofer. : Frequencies lower than 157 Hz are sent to the subwoofer. *6 If you are using a two-speaker system, set the fader level to "00. LOW POWER : Select either one which mutes the sounds while using a mobile phone. : VOLUME 00 ­ VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. *9 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level set higher than "VOLUME 30. " *10 Displayed only when any source other than "AM" is selected. *11 Displayed only when any source other than "AUX IN" is selected. More about this unit If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. ⷠIf no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled. Network-Tracking Reception requires two types of Radio Data System signals--PI (Programme Identification) and AF (Alternative Frequency) to work correctly. [. . . ] the playback order is determined by the write-in time stamp. The first track/folder written into the USB device will be the first track/folder for playback. The MP3/WMA tracks have not been properly copied into the USB device. Copy MP3/WMA tracks again into the USB device, and try again. [. . . ]